TAPPI - TAPPI: Recent submissions

Now showing items 281-300 of 533

    • TAPPI TIP 0404-28 

      Type: standard
      Source: TAPPI - TAPPI:;2007
      Organization : TAPPI - TAPPI

    • TAPPI T234 CM 

      Type: standard
      Source: TAPPI - TAPPI:;2012
      Organization : TAPPI - TAPPI
      Abstract: This is a method by which the coarseness (weight per unit length) of the fibers in a pulp may be ascertained by counting the crossings of a known weight of fibers per unit area on a prepared slide over lines of known length. ...

    • TAPPI TIP 0404-17 

      Type: standard
      Source: TAPPI - TAPPI:;2009
      Organization : TAPPI - TAPPI

    • TAPPI TIP 0305-32 

      Type: standard
      Source: TAPPI - TAPPI:;2007
      Organization : TAPPI - TAPPI

    • TAPPI T 824 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2009
      Organization : TAPPI - TAPPI

    • TAPPI T 530 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2012
      Organization : TAPPI - TAPPI
      Abstract: This method (1-3) measures the resistance of paper to permeation of an aqueous penetrant and is a useful general purpose test for degree of sizing. It is applicable to most bleached, unbleached, and colored paper ...

    • TAPPI T 203 CM 

      Type: standard
      Source: TAPPI - TAPPI:;2009
      Organization : TAPPI - TAPPI

    • TAPPI T 220 SP 

      Type: standard
      Source: TAPPI - TAPPI:;2010
      Organization : TAPPI - TAPPI
      Abstract: Scope and significance
      This procedure describes the testing of pulp handsheets, prepared in accordance with TAPPI T 205 "Forming Handsheets for Physical Tests of Pulp," for their strength and other ...
      Subject(s) : Handsheets , Physical tests , Pulp ,

    • TAPPI T 452 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2008
      Organization : TAPPI - TAPPI

    • TAPPI TIP 0304-46 

      Type: standard
      Source: TAPPI - TAPPI:;2008
      Organization : TAPPI - TAPPI

    • TAPPI T 476 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2011
      Organization : TAPPI - TAPPI
      Abstract: This method determines the resistance of surfaces of paper and paperboard to the action of abrasion, either wet or dry, by measuring abrasion loss. This test is not applicable to surfaces treated with wax or similar ...
      Subject(s) : Abrasion , Abrasion resistance , Bonding strength , Coatings , Surface strength ,

    • TAPPI TIP 0305-21 

      Type: standard
      Source: TAPPI - TAPPI:;2008
      Organization : TAPPI - TAPPI

    • TAPPI TIP 0416-20 

      Type: standard
      Source: TAPPI - TAPPI:;2009
      Organization : TAPPI - TAPPI

    • TAPPI T236 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2006
      Organization : TAPPI - TAPPI

    • TAPPI UM 258 

      Type: standard
      Source: TAPPI - TAPPI:;2010
      Organization : TAPPI - TAPPI
      Abstract: This method (1, 2) concerns the processing of pulp by means of a laboratory beating device, the Kollergang, prior to forming handsheets, for the purpose of determining its behavior when subjected to a definite ...
      Subject(s) : Kollergang , Laboratories , Pulps ,

    • TAPPI TIP 0402-22 

      Type: standard
      Source: TAPPI - TAPPI:;2008
      Organization : TAPPI - TAPPI

    • TAPPI UM 213 

      Type: standard
      Source: TAPPI - TAPPI:;2012
      Organization : TAPPI - TAPPI
      Abstract: This method permits the study of the repulpability of splices in water.
      This method simulates the results obtained when splices are added to the stock pulper for reprocessing.

    • TAPPI T 496 SP 

      Type: standard
      Source: TAPPI - TAPPI:;2013
      Organization : TAPPI - TAPPI
      Abstract: Scope and significance
      This practice is used for the preparation of test specimens for the internal tearing resistance of paper, board, and related materials when a force is applied perpendicular to ...

    • TAPPI T 830 OM 

      Type: standard
      Source: TAPPI - TAPPI:;2011
      Organization : TAPPI - TAPPI
      Abstract: Scope and summary
      Ink rub testers are designed to evaluate the scuffing or rubbing resistance of an ink film or fiber surface on container board and corrugated board. A variety of tests may be made, ...
      Subject(s) : Container boards , Corrugated boards , Fiberboards , Ink rub resistance ,

    • TAPPI TIP 0607-15 

      Type: standard
      Source: TAPPI - TAPPI:;2002
      Organization : TAPPI - TAPPI