درباره ما
Search
CSV
RISIEEE NESC: National Electrical Safety Code(R)
Abstract: A. Covered
See Figure 011-1.
The NESC covers:
1. Supply and communication facilities (including metering) and associated work practices employed by a public or private electric supply, communications, railway, trolley, street and area lighting, traffic signal (or other signal), irrigation district or other community owned utility, or a ...
See Figure 011-1.
The NESC covers:
1. Supply and communication facilities (including metering) and associated work practices employed by a public or private electric supply, communications, railway, trolley, street and area lighting, traffic signal (or other signal), irrigation district or other community owned utility, or a ...
IEEE 14471: Guide for Adoption of ISO/IEC TR 14471:2007 Information Technology-Software Engineering-Guidelines for the Adoption of CASE Tools - IEEE Computer Society
Abstract: Since CASE adoption is a subject of the broader technology transition problem, this Technical Report addresses the adoption practices appropriate for a wide range of computing organisations. This Technical Report neither ...
IEEE 1451.3: Standard for a Smart Transducer Interface for Sensors and ActuatorsDigital Communication and Transducer Electronic Data Sheet (TEDS) Formats for Distributed Multidrop Systems
Abstract: Foreword
The main objectives of this standard are to:
— Enable plug and play at the transducer level by providing a common communication interface for transducers which are physically separated
— Enable ...
The main objectives of this standard are to:
— Enable plug and play at the transducer level by providing a common communication interface for transducers which are physically separated
— Enable ...
IEEE N323B: Radiation Protection Instrumentation Test and Calibration, Portable Survey Instrumentation for Near Background Operation
Abstract: This standard establishes minimum acceptance performance requirements for portable radiation protection instruments used for detection and measurement of ionizing radiation fields or levels of radioactive surface contamination ...
IEEE 492: Guide for Operation and Maintenance of Hydro-Generators
Abstract: Application
This guide covers general recommendations for the operation, loading, and maintenance of synchronous hydro-generators and generator/motors. It does not apply to synchronous machines having ...
This guide covers general recommendations for the operation, loading, and maintenance of synchronous hydro-generators and generator/motors. It does not apply to synchronous machines having ...
IEEE C57.12.10: Requirements for Liquid-Immersed Power Transformers
Abstract: This voluntary consensus standard sets forth the requirements for power transformer application. This standard is intended to be used as a basis for performance, interchangeability, and safety of the equipment covered and to assist in the proper selection of such equipment.
This document is a product standard that covers certain electrical, dim...
This document is a product standard that covers certain electrical, dim...
IEEE 293: Test Procedure for Single-Degree-of-Freedom Spring-Restrained Rate Gyros
Abstract: INTRODUCTION
This Test Procedure is a compilation of recommended rate gyro test procedures derived from those currently in use, including test conditions to be considered. In some cases alternate methods ...
This Test Procedure is a compilation of recommended rate gyro test procedures derived from those currently in use, including test conditions to be considered. In some cases alternate methods ...
IEEE C57.138: Recommended Practice for Routine Impulse Test for Distribution Transformers
Abstract: This recommended practice covers routine impulse tests performed on distribution transformers, as required in IEEE Std C57.12.00-1993, and described in subclause 10.4 of IEEE Std C57.12.90-1993.
Distribution transformers ...
Distribution transformers ...
IEEE 902: Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems - IEEE Yellow Book
Abstract: Introduction
Even with the best design and equipment, the expected safety and reliability performance of a power system is largely dependent on the quality and capability of its operation and maintenance. ...
Even with the best design and equipment, the expected safety and reliability performance of a power system is largely dependent on the quality and capability of its operation and maintenance. ...