درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 421-440 of 22183
-
-
DIN EN 9104-002
Abstract: Scope: Die in diesem Dokument festgelegten Anforderungen gelten für die IAQG und zugehörige Sektoren, die die Überwachung festgelegter Anforderungen nach der Normenreihe EN 9104 (d. h. EN 9104-001, EN 9104-002, ... -
DIN EN 16796-2
Abstract: Scope: This European Standard specifies the method of energy consumption measurement for the following types of industrial trucks as defined in ISO 5053-1: — counterbalance lift truck; — articulated counterbalance ... -
-
-
DIN EN 19694-6
Abstract: Scope: This European Standard provides a harmonized methodology for calculating GHG emissions from the ferro-alloys industry based on the mass balance approach2. It also provides key performance indicators over time of ... -
DIN EN ISO 10328
Abstract: Scope: IMPORTANT — This International Standard is suitable for the assessment of the conformity of lower limb prosthetic devices/structures with the strength requirements specified in 4.4 of ISO 22523:2006 (see NOTE ... -
DIN EN 378-2
Abstract: Scope: This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair ... -
DIN EN 61174
Abstract: Scope: Diese Internationale Norm legt die Leistungsanforderungen, Prüfverfahren und geforderten Prüfergebnisse für Geräte fest, die Leistungsanforderungen entsprechen, die nicht geringwertiger sind als ... -
DIN EN ISO 24504
Abstract: Scope: This International Standard specifies methods to determine an appropriate sound pressure level range for spoken announcements in environments where ambient noise is less than 80 dB. The specified methods follow the ... -
LN 9368-3
Abstract: Scope: The code numbers listed in this standard shall be used for the designation of aerospace surface treatments. These code numbers are intended to replace the sometimes quite extensive annotations on drawings and in ... -
DIN EN 15220
Abstract: Scope: This European Standard specifies the requirements for the design, dimensions, performance and testing of single double and multiple brake indicators. It applies to pneumatically and electrically operating brake ... -
DIN ISO 34-1
Abstract: Scope: This part of ISO 34 specifies three test methods for the determination of the tear strength of vulcanized or thermoplastic rubber, namely the following: — method A, using a trouser test piece; — method ... -
-
DVS 2202
Abstract: Scope: Purpose and scope This guideline documents and describes fl aws in welded joints of thermoplastic materials for the processes mentioned herein, with the aim of enabling a generally applicable assessment under ... -
DIN EN 13230-5
Abstract: Scope: This part of the EN 13230 series defines additional technical criteria and control procedures for manufacturing and testing special elements. -
-
DIN EN 1434-1
Abstract: Scope: This European Standard specifies the general requirements for heat meters. Heat meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) ... -
DIN EN ISO 10140-1
Abstract: Scope: This part of ISO 10140 specifies test requirements for building elements and products, including detailed requirements for preparation, mounting, operating and test conditions, as well as applicable quantities and ... -