درباره ما
AASHTO - American Association of State Highway and Transportation Officials: Recent submissions
Now showing items 521-540 of 2524
-
AASHTO M 181
Abstract: This specification covers materials used in the construction of fences and gates that comprise (a) chain-link fence fabric and (b) posts, rails, ties, bands, bars, rods and other fittings, and hardware designed to support ... -
AASHTO T 336
Abstract: This test method covers determination of the coefficient of thermal expansion (CTE) of hydraulic cement concrete cores and cylinders. Because it is known that the degree of saturation of concrete influences its measured ... -
AASHTO M 319
Abstract: This specification covers the use of reclaimed concrete aggregate as an unbound granular base course material. When properly processed, hauled, spread, and compacted on a prepared grade to appropriate density standards, ... -
AASHTO T 79
Abstract: This method covers the procedure for the determination of flash points by the tag open-cup apparatus of cutback asphalts having flash points of less than 93°C (200°F).
The sample is placed in the tester and ... -
AASHTO LRFD BOX GIRDER
Abstract: PREFACE
AASHTO first published Guide Specifications for Horizontally Curved Highway Bridges in 1980. These Guide Specifications included Allowable Stress Design (ASD) provisions developed by ... -
AASHTO TP 93
Abstract: This method covers the measurement of formwork pressure of fresh self-consolidating concrete (SCC) using pressure transducers attached to formwork.
This is a field test with the intention of measuring formwork pressure ... -
AASHTO M 213
Abstract: This specification covers preformed expansion joint fillers having relatively little extrusion and substantial recovery after release from compression.
The values stated in SI units are to be regarded as the standard. ... -
AASHTO HB-17 DIVISION II SEC 5
Abstract: DESCRIPTION
This work shall consist of constructing drilled foundation shafts, with or without bell footings, including the placing of reinforcing steel and concrete all in accordance with the plans, ... -
AASHTO T 339
Abstract: This method is designed for the determination of the isocyanate (NCO) content of the resin system found in polyurethane paints.
The values stated in SI units are to be regarded as the standard.
This standard ...