درباره ما
ASME - ASME International: Recent submissions
Now showing items 501-520 of 1083
-
ASME Y14.38
Abstract: The abbreviations and acronyms, hereinafter referred to as "abbreviations," listed in this Standard are used on engineering drawings and related documentation.
Purpose
The intent of this Standard ... -
ASME PTC 4.2
Abstract: OBJECT AND SCOPE
This Code appIies to the pulverizing system as a whole, including all the component parts necessary to take the raw coal, hot air and tempering air at the system inlet, and deliver pulverized ... -
ASME B1.10M
Abstract: This Standard specifies the thread form, series, tolerance, and designation for the Unified Miniature Screw Threads. The series covers a diameter range of 0.30 mm to 1.40 mm, extending the metric M-Profile and unified ... -
ASME AG-1
Abstract: This Code provides requirements for the performance, design, fabrication, installation, inspection, acceptance testing, and quality assurance of equipment used in air and gas treatment systems in nuclear facilities. ... -
ASME B16.48
Abstract: This Standard covers pressure–temperature ratings, materials, dimensions, tolerances, marking, and testing for operating line blanks in sizes NPS 1⁄2 through NPS 24 for installation between ... -
ASME MFC-11
Abstract: ASME MFC-11 establishes common terminology and gives guidelines for the selection, installation, calibration, and operation of Coriolis flowmeters for the determination of mass flow, density, volume flow, and other parameters. ... -
ASME B30.16
Abstract: SCOPE OF B30.16
Volume B30.16 includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of hand chain-operated chain hoists and electric- and ... -
ASME B18.13
Abstract: (a) This Standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as sems. The word sems is recognized in the United States as a generic term ... -
ASME NUM-1
Abstract: FOREWORD
The Committee on Cranes for Nuclear Power Plants was first established in 1976. In 1980, the scope of the Committee was revised, and its name was changed to the Committee on Cranes for Nuclear ... -
ASME STP-NU-051-1
Abstract: Background and Scope
The Multinational Design Evaluation Programme (MDEP) Code Comparison Project was initiated in late 2006 in response to a request by the MDEP Codes and Standards Working Group (CSWG) ... -
ASME B31EA
Abstract: This Standard applies to above-ground, metallic piping systems in the scope of the ASME B31 Code for Pressure Piping (B31.1, B31.3, B31.4, B31.5, B31.8, B31.9, B31.11). The requirements described in this Standard are valid ... -
ASME PTC 30
Abstract: OBJECT AND SCOPE
The scope of this Code covers, but is not limited to, the testing of mechanical draft heat exchangers, of both the forced draft and induced draft types; natural draft heat exchangers; and fan ... -
ASME HST-3
Abstract: (a) This Standard establishes performance requirements for manually lever operated chain hoists used for lifting, pulling, and tensioning-type applications.
(b) The specifications and information contained in this ... -
ASME B1.21M
Abstract: This Standard establishes the basic triangular profile for the MJ thread form; provides a system of designations; lists the standard series of diameter/pitch combinations for diameters from 1.6 to 200 mm; and specifies ... -
ASME B94.35
Abstract: This standard covers split sleeve, collet type drivers for driving straight shank drills, reamers and similar tools, without tangs from 0.0390 dia. through 0.1220 dia., and with tangs for tools from 0.1250 dia. through ... -
ASME B30.22 INTERPRETATIONS
Abstract: Scope:
This publication includes all of the written replies issued between the indicated dates by the Secretary, speaking for the ASME B30 Committee, Safety Standards for Cableways, ... -
ASME B18.2.1
Abstract: This Standard covers the dimensional requirements for nine product types of inch series bolts and screws recognized as American National Standard. Also included are appendices covering gaging procedures, grade markings for ... -
ASME B4.1
Abstract: Scope and Application.
This standard presents definitions of terms applying to fits between plain (non-threaded) cylindrical parts and makes recommendations on preferred sizes, allowances, tolerances, and fits for use ... -
ASME CSD-1 INTERPRETATIONS
Abstract: FOREWORD
This publication includes written replies issued in the year indicated by the secretary, speaking for the ASME CSDAFB Committee, to inquiries concerning interpretations of technical aspects ...