IEC - International Electrotechnical Commission: Recent submissions
Now showing items 481-500 of 9213
-
English -- Field device tool (FDT) interface specification – Part 51-32: Communication implementation for common object model – IEC 61784 CP 3/4, CP 3/5 and CP 3/6 - Edition 1.0
Abstract: Scope: This part of the IEC 62453-51-xy series, which is a Technical Report, provides information for integrating the PROFINET®1 technology into the COM-based implementation of the FDT interface specification (IEC TR ... -
English -- Radio data system (RDS) - VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz - Part 1: Modulation characteristics and baseband coding - Edition 1.0
Abstract: Scope: This part of IEC 62106 defines the basic layer of the Radio Data System (RDS) intended for application to VHF/FM sound broadcasts in the range 64,0 MHz to 108,0 MHz, which can carry either stereophonic (pilot-tone ... -
English -- Industrial communication networks – Profiles – Part 5-6: Installation of fieldbuses – Installation profiles for CPF 6 IEC - Edition 4.0
Abstract: Scope: This part of IEC 61784-5 specifies the installation profiles for CPF 6 (INTERBUS)1. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018 1 INTERBUS is a ... -
English -- Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 - Edition 2.0
Abstract: Scope: This part of IEC 61784 specifies the installation profiles for CPF 12 (EtherCAT™) 1. The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2018. 1 EtherCAT™ ... -
French -- Spécifications pour types particuliers de fils de bobinage – Partie 55: Fil brasable de section circulaire en cuivre émaillé avec polyuréthane et avec surcouche polyamide, classe 180 - Edition 2.1; Consolidated Reprint|English -- Specifications for particular types of winding wires – Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180 - Edition 2.1; Consolidated Reprint
Abstract: Scope: This part of IEC 60317 specifies the requirements of solderable enamelled round copper winding wire of class 180 with a dual coating. The underlying coating is based on polyurethane resin, which may be modified ... -
English -- Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – Part 11: MPEG-4 AAC and its extensions in LATM/LOAS - Edition 1.1; Consolidated Reprint
Abstract: Scope: This part of IEC 61937 describes the method to convey non-linear PCM bitstreams encoded according to the MPEG-4 AAC format and its extensions spectral band replication, parametric stereo and MPEG surround, framed ... -
English -- Field device tool (FDT) interface specification – Part 52-90: Communication implementation for common language infrastructure – IEC 61784 CPF 9 - Edition 1.0
Abstract: Scope: This part of the IEC 62453-52-xy series, which is a Technical Report, provides information for integrating the HART®1 technology into the CLI-based implementation of FDT interface specification (IEC TR 62453-42). ... -
English -- Industrial communication networks – Fieldbus specifications – Part 5-12: Application layer service definition – Type 12 elements - Edition 4.0
Abstract: Scope: General The fieldbus Application Layer (FAL) provides user programs with a means to access the fieldbus communication environment. In this respect, the FAL can be viewed as a “window between corresponding ... -
French -- Expression des qualités de fonctionnement des analyseurs de gaz – Partie 2: Mesure de l'oxygène contenu dans le gaz en utilisant des capteurs électrochimiques à haute température - Edition 2.0|English -- Expression of performance of gas analyzers – Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors - Edition 2.0
Abstract: Scope: This part of IEC 61207 applies to all aspects of analyzers using high-temperature electrochemical sensors for the measurement of oxygen in gas. It applies to in-situ and extractive analyzers and to analyzers installed ... -
English -- Photovoltaic power systems (PVPS) – Information model for availability - Edition 1.0
Abstract: Scope: A common basis of understanding results from defined metrics that can be useful to the stakeholders, populated by data collected in the operation of the PVPS: a) To provide a standarized approach to characterize ... -
English -- Industrial communication networks – Fieldbus specifications – Part 3-4: Data-link layer service definition – Type 4 elements - Edition 3.0
Abstract: Scope: General This part of IEC 61158 provides common elements for basic time-critical messaging communications between devices in an automation environment. The term “time-critical” is used to represent the ... -
French -- Connecteurs pour équipements électriques et électroniques – Essais et mesures – Partie 23-3: Essais d’écrantage et de filtrage – Essai 23c: Efficacité de blindage des connecteurs et des accessoires – Méthode de la ligne d’injection - Edition 2.0|English -- Connectors for electrical and electronic equipment – Tests and measurements – Part 23-3: Screening and filtering tests – Test 23c: Shielding effectiveness of connectors and accessories – Line injection method - Edition 2.0
Abstract: Scope: This part of IEC 60512 defines a standard test method for measuring the shielding effectiveness SE of a shielded connector, or of a connector not provided with integral shield once fitted with a shielding accessory ... -
French -- Ventilateurs de confort et régulateurs de vitesse pour applications domestiques et analogues – Méthodes de mesure de l'aptitude à la fonction - Edition 2.0|English -- Comfort fans and regulators for household and similar purposes – Methods for measuring performance - Edition 2.0
Abstract: Scope: This International Standard specifies the performance-measuring methods of comfort fans and regulators for household and similar purposes, including conventional fans, tower fans and bladeless fans, their rated ... -
English -- Generic smart grid requirements – Part 2-4: Electric transportation related domain - Edition 1.0
Abstract: Scope: This part of IEC SRD 62913 initiates and illustrates the IEC\'s systems approach based on Use Cases and involving the identification of generic smart grid requirements for further standardization work for the electric ... -
English -- High frequency surgical equipment and high frequency surgical accessories – Operation and maintenance - Edition 2.0
Abstract: Scope: This document contains guidelines for medical and nursing personnel regarding the safe and effective operation of HIGH FREQUENCY SURGICAL EQUIPMENT and HIGH FREQUENCY SURGICAL ACCESSORIES (also referred to as HF ... -
English -- Industrial communication networks – Fieldbus specifications – Part 4-4: Data-link layer protocol specification – Type 4 elements - Edition 3.0
Abstract: Scope: General The data-link layer provides basic time-critical messaging communications between devices in an automation environment. This protocol provides a means of connecting devices through a partial mesh network, ... -
French -- Interface d'éclairage adressable numérique – Partie 104: Exigences générales – Composants de système à connexion alternative ou sans fil - Edition 1.0|English -- Digital addressable lighting interface – Part 104: General requirements – Wireless and alternative wired system components - Edition 1.0
Abstract: Scope: The IEC 62386 series specifies a bus system for control by digital signals of electronic lighting equipment. This part of IEC 62386 applies to a system with wireless or alternative wired communication between its ... -
French -- Circuits intégrés – Circuits intégrés tridimensionnels – Partie 1: Terminologie - Edition 1.0|English -- Integrated circuits – Three dimensional integrated circuits – Part 1: Terminology - Edition 1.0
Abstract: Scope: This part of IEC 63011 provides definitions pertaining to multichip integrated circuits, as vertically stacked dies using through-silicon vias (TSVs) or micro bumps. Terms and definitions related to the fabrication ... -
French -- Systèmes de vidéosurveillance destinés à être utilisés dans les applications de sécurité – Partie 2-31: Transmission en continu en direct et contrôle basé sur les services web|English -- Video surveillance systems for use in security applications – Part 2-31: Live streaming and control based on web services
Abstract: Scope: This document defines procedures for communication between network video clients and video transmitter devices. This new set of specifications makes it possible to build network video systems with devices and receivers ...

درباره ما