درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 861-880 of 9213
-
IEC TR 63054
Abstract: This document applies to the fire risk analysis of low-voltage switchgear and controlgear (hereinafter referred to as "equipment") referring to the IEC 60947 relevant publications, where the following applies: – only ... -
IEC 62608-2
Abstract: This document specifies the operational model for home network configuration. In the home network, various CE devices that have distinctive functions are connected on a shared network. However, there is no manager in the ... -
IEC TS 62647-4
Abstract: This part of IEC 62647, which is a Technical Specification, defines the requirements for replacing solder balls on ball grid array (BGA) component packages in the context of an electronic components management plan (ECMP) ... -
IEC 62153-4-7
Abstract: This triaxial method is suitable to determine the surface transfer impedance and/or screening attenuation and coupling attenuation of mated screened connectors (including the connection between cable and connector) and ... -
IEC 60893-3-6
Abstract: This part of IEC 60893 gives the requirements for industrial rigid laminated sheets for electrical purposes based on silicone resins and different reinforcements. Applications and distinguishing properties are given in ... -
IEC 63093-5
Abstract: This part of IEC 63093 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of EP-cores made of ferrite, the essential dimensions of coil formers to be used with them and ... -
IEC 62481-1-1
Abstract: This part of IEC 62481-1, the DLNA guidelines series, specifies the core architecture and protocols of DLNA implementations. The interoperability guidelines consist of five parts covering Architecture and Protocols, Media ... -
-
IEC TS 62257-7
Abstract: This part of IEC 62257 specifies the general requirements for the generators in decentralized rural electrification systems. This document is a general introduction followed by more specific documents dedicated to the ... -
IEC 62629-13-1
Abstract: This part of IEC 62629 specifies the visual inspection methods of ghost image. This document is applicable to stereoscopic displays using glasses. -
IEC 62351-3
Abstract: This part of IEC 62351 specifies how to provide confidentiality, integrity protection, and message level authentication for SCADA and telecontrol protocols that make use of TCP/IP as a message transport layer when ... -
IEC 62056-5-3
Abstract: This part of IEC 62056 specifies the DLMS/COSEM application layer in terms of structure, services and protocols for DLMS/COSEM clients and servers, and defines rules to specify the DLMS/COSEM communication profiles It ... -
IEC 62841-2-11
Abstract: This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to reciprocating saws such as jig saws and sabre saws. -
IEC 62031 (REDLINE + STANDARD)
Abstract: This document specifies general and safety requirements for light-emitting diode (LED) modules: • non-integrated LED modules (LEDni modules) and semiintegrated LED modules (LEDsi modules) for operation under constant ... -
IEC 61162-450 (REDLINE + STANDARD)
Abstract: This part of IEC 61162 specifies interface requirements and methods of test for high speed communication between shipboard navigation and radiocommunication equipment as well as between such systems and other ship systems ... -
IEC 62271-110
Abstract: This part of IEC 62271 is applicable to AC switching devices designed for indoor or outdoor installation, for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 000 V and applied for inductive ... -
IEC 61076-3-119
Abstract: This part of IEC 61076-3 establishes specifications and test requirements for 10-way shielded and unshielded rectangular, free and fixed connectors, with push-pull coupling, for data transmission with frequencies up to 100 ... -
IEC 61249-2-47
Abstract: This part of IEC 61249 gives requirements for properties of non-halogenated epoxide non-woven reinforced core/woven E-glass reinforced surface laminate sheets of thermal conductivity and defined flammability (vertical ... -
IEC 62442-2 (REDLINE + STANDARD)
Abstract: This part of IEC 62442 defines a measurement method of the power losses of electromagnetic controlgear, the total input power and the standby power of electronic controlgear for high intensity discharged lamps (excluding ... -
IEC 60335-2-103
Abstract: This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric drives for horizontally and vertically moving gates, doors, garage doors and windows for household and similar ...