درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 941-960 of 9213
-
IEC TS 62565-4-2
Abstract: This part of IEC 62565, which is a Technical Specification, specifies the essential general and optical requirements of monodisperse luminescent nanomaterials used in general lighting and display products to enable their ... -
IEC 61788-22-1
Abstract: This part of IEC 61788-22-1 describes general items concerning the specifications for superconducting sensors and detectors, which are the basis for specifications given in other parts of IEC 61788 for various types of ... -
IEC TS 62257-7 (REDLINE + STANDARD)
Abstract: This part of IEC 62257 specifies the general requirements for the generators in decentralized rural electrification systems. This document is a general introduction followed by more specific documents dedicated to the ... -
IEC 60793-1-47
Abstract: This part of IEC 60793 establishes uniform requirements for measuring the macrobending loss of single-mode fibres (class B) at 1 550 nm or 1 625 nm, category A1 multimode fibres at 850 nm or 1 300 nm, and category A3 and ... -
IEC 62680-1-4
Abstract: This specification defines the architecture and methodology for unilateral Product Authentication. It is intended to be fully compatible with and extend existing PD and USB infrastructure. Information is provided to allow ... -
-
IEC 80601-2-30 (REDLINE + STANDARD)
Abstract: Clause 1 of the general standard2 applies, except as follows: Replacement: This part of the 80601 International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of AUTOMATED SPHYGMOMANOMETERS, hereafter ... -
IEC 61482-2
Abstract: This part of IEC 61482 is applicable to protective clothing used in work where there is the risk of exposure to an electric arc hazard. This document specifies requirements and test methods applicable to materials ... -
IEC 61466-2
Abstract: This part of IEC 61466 is applicable to composite string insulator units with a specified mechanical load (SML) of 40 kN to 600 kN for AC overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater ... -
IEC 62041
Abstract: This document is applicable to transformers, reactors and power supply units covered by the IEC 61558 series of standards. This document deals with the electromagnetic compatibility requirements for emission and immunity ... -
IEC 60099-5
Abstract: This part of IEC 60099 provides information, guidance, and recommendations for the selection and application of surge arresters to be used in three-phase systems with nominal voltages above 1 kV. It applies to gapless ... -
IEC 60799
Abstract: This document specifies requirements for cord sets and interconnection cord sets for household and similar general purpose equipment. It does not apply to cord sets for industrial purposes (with plugs and connectors according ... -
IEC TS 62933-4-1
Abstract: This part of IEC 62933, which is a Technical Specification, describes environmental issues associated with electrical energy storage systems (EES systems), and presents guidelines to address the environmental impacts to ... -
IEC 62569-1
Abstract: The IEC 62569 series defines principles and methods for the specification of objects by object properties, for example in data sheets, by utilizing predefined and internationally standardized (dictionary) properties residing ... -
IEC 60335-2-102
Abstract: This International Standard deals with the safety of gas, oil and solid-fuel burning appliances having electrical connections, for household and similar purposes, their rated voltage being not more than 250 V for single-phase ... -
IEC 62442-1
Abstract: This part of IEC 62442 defines a measurement and calculation method of the total input power for controlgear-lamp circuits when operating with their associated fluorescent lamp(s). The calculation method for the efficiency ... -
IEC 61196-1-113
Abstract: This part of IEC 61196 applies to coaxial communications cables. It specifies a test method for determining the attenuation constant of coaxial cables for use in communications systems. The test is applicable preferably ... -
IEC 60598-1
Abstract: This Part 1 of IEC 60598 specifies general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. The requirements and related tests of this standard cover: ... -
IEC 60675
Abstract: This standard applies to electric direct-acting room heaters. They may be portable, stationary, fixed, or built-in. It does not apply to: – thermal-storage room heaters (IEC 60531); – heating appliances ... -
IEC 62893-1
Abstract: This part of IEC 62893 specifies construction, dimensions and test requirements for cables with extruded insulation and sheath having a voltage rating of up to and including 0,6/1 kV AC or up to and including 1 500 V DC ...