درباره ما
IEC 61508-6
English -- Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 - Edition 2.0;
French -- Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité – Partie 6: Lignes directrices pour l'application de la CEI 61508-2 et de la CEI 61508-3 - Edition 2.0
Organization:
IEC - International Electrotechnical Commission
Year: 2010
Abstract: This part of IEC 61508 contains information and guidelines on IEC 61508-2 and IEC 61508-3.
– Annex A gives a brief overview of the requirements of IEC 61508-2 and IEC 61508-3 and sets out the functional steps in their application.
– Annex B gives an example technique for calculating the probabilities of hardware failure and should be read in conjunction with 7.4.3 and annex C of IEC 61508-2 and annex D.
– Annex C gives a worked example of calculating diagnostic coverage and should be read in conjunction with annex C of IEC 61508-2.
– Annex D gives a methodology for quantifying the effect of hardware-related common cause failures on the probability of failure.
– Annex E gives worked examples of the application of the software safety integrity tables specified in annex A of IEC 61508-3 for safety integrity levels 2 and 3.
IEC 61508-1, IEC 61508-2, IEC 61508-3 and IEC 61508-4 are basic safety publications, although this status does not apply in the context of low complexity E/E/PE safety-related systems (see 3.4.4 of IEC 61508-4). As basic safety publications, they are intended for use by technical committees in the preparation of standards in accordance with the principles contained in IEC Guide 104 and IEC/ISO Guide 51. IEC 61508 is also intended for use as a stand-alone standard.
One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. In this context, the requirements, test methods or test conditions of this basic safety publication do not apply unless specifically referred to or included in the publications prepared by those technical committees.
NOTE In the USA and Canada, until the proposed process sector implementation of IEC 61508 (i.e. IEC 61511) is published as an international standard, existing national process safety standards based on IEC 61508 (i.e. ANSI/ISA S84.01-1996) can be applied to the process sector instead of IEC 61508.
– Annex A gives a brief overview of the requirements of IEC 61508-2 and IEC 61508-3 and sets out the functional steps in their application.
– Annex B gives an example technique for calculating the probabilities of hardware failure and should be read in conjunction with 7.4.3 and annex C of IEC 61508-2 and annex D.
– Annex C gives a worked example of calculating diagnostic coverage and should be read in conjunction with annex C of IEC 61508-2.
– Annex D gives a methodology for quantifying the effect of hardware-related common cause failures on the probability of failure.
– Annex E gives worked examples of the application of the software safety integrity tables specified in annex A of IEC 61508-3 for safety integrity levels 2 and 3.
IEC 61508-1, IEC 61508-2, IEC 61508-3 and IEC 61508-4 are basic safety publications, although this status does not apply in the context of low complexity E/E/PE safety-related systems (see 3.4.4 of IEC 61508-4). As basic safety publications, they are intended for use by technical committees in the preparation of standards in accordance with the principles contained in IEC Guide 104 and IEC/ISO Guide 51. IEC 61508 is also intended for use as a stand-alone standard.
One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. In this context, the requirements, test methods or test conditions of this basic safety publication do not apply unless specifically referred to or included in the publications prepared by those technical committees.
NOTE In the USA and Canada, until the proposed process sector implementation of IEC 61508 (i.e. IEC 61511) is published as an international standard, existing national process safety standards based on IEC 61508 (i.e. ANSI/ISA S84.01-1996) can be applied to the process sector instead of IEC 61508.
Collections
:
Show full item record
| contributor author | IEC - International Electrotechnical Commission | |
| date accessioned | 2017-09-04T17:47:13Z | |
| date available | 2017-09-04T17:47:13Z | |
| date copyright | 2010.04.01 | |
| date issued | 2010 | |
| identifier other | EOFGRCAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;quessionid=31064A12890E9/handle/yse/170484 | |
| description abstract | This part of IEC 61508 contains information and guidelines on IEC 61508-2 and IEC 61508-3. – Annex A gives a brief overview of the requirements of IEC 61508-2 and IEC 61508-3 and sets out the functional steps in their application. – Annex B gives an example technique for calculating the probabilities of hardware failure and should be read in conjunction with 7.4.3 and annex C of IEC 61508-2 and annex D. – Annex C gives a worked example of calculating diagnostic coverage and should be read in conjunction with annex C of IEC 61508-2. – Annex D gives a methodology for quantifying the effect of hardware-related common cause failures on the probability of failure. – Annex E gives worked examples of the application of the software safety integrity tables specified in annex A of IEC 61508-3 for safety integrity levels 2 and 3. IEC 61508-1, IEC 61508-2, IEC 61508-3 and IEC 61508-4 are basic safety publications, although this status does not apply in the context of low complexity E/E/PE safety-related systems (see 3.4.4 of IEC 61508-4). As basic safety publications, they are intended for use by technical committees in the preparation of standards in accordance with the principles contained in IEC Guide 104 and IEC/ISO Guide 51. IEC 61508 is also intended for use as a stand-alone standard. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. In this context, the requirements, test methods or test conditions of this basic safety publication do not apply unless specifically referred to or included in the publications prepared by those technical committees. NOTE In the USA and Canada, until the proposed process sector implementation of IEC 61508 (i.e. IEC 61511) is published as an international standard, existing national process safety standards based on IEC 61508 (i.e. ANSI/ISA S84.01-1996) can be applied to the process sector instead of IEC 61508. | |
| language | English, French | |
| title | IEC 61508-6 | num |
| title | English -- Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 - Edition 2.0 | en |
| title | French -- Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité – Partie 6: Lignes directrices pour l'application de la CEI 61508-2 et de la CEI 61508-3 - Edition 2.0 | other |
| type | standard | |
| page | 240 | |
| status | Active | |
| tree | IEC - International Electrotechnical Commission:;2010 | |
| contenttype | fulltext |
Related items
Showing items related by title, author, creator and subject.
-
BSI BS EN 61508-6
Type: standardSource: BSI - British Standards Institution:;2010Organization : BSI - British Standards InstitutionSubject(s) : Automatic control systems , Computer applications , Computer software , Computerized control , Electrical components , Electrical equipment , Electrical safety , Electronic equipment and components , Equipment safety , Production equipment , Programmable , Programming techniques , Safety devices , Safety engineering , -
BS EN IEC 61508-6 Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
Type: StandardSource: BSI - British Standards Institution:;2025Organization : BSI - British Standards InstitutionPublisher: BSI - British Standards Institution -
IEC TR 61508-0
Type: standardSource: IEC - International Electrotechnical Commission:;2005Organization : IEC - International Electrotechnical CommissionAbstract: This Technical Report introduces the concept of functional safety and gives an overview of the IEC 61508 series.
Â