درباره ما
IEC 61747-40-5
Liquid crystal display devices – Part 40-5: Mechanical testing of display cover glass for mobile devices – Strength against dynamic impact by a sharp object with the specimen rigidly supported - Edition 1.0
| contributor author | IEC - International Electrotechnical Commission | |
| date accessioned | 2018-07-31T09:58:41Z | |
| date available | 2018-07-31T09:58:41Z | |
| date copyright | 2018.02.01 | |
| date issued | 2018 | |
| identifier other | UFPVEGAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;quessionid=31064A12890E9/handle/yse/264766 | |
| description abstract | This part of IEC 61747 is a mechanical performance testing procedure for cover glass used in electronic displays in mobile devices. This document focuses on the measurement of surface impact energy required to fracture a specimen due to the collision of sharp particles onto the surface of a cover glass. This is achieved by dropping a ball on a sheet of coated abrasives placed on the cover glass, which is rigidly supported. The failure mode is associated with damage introduction via sharp contact. Crack propagation is enhanced by central tension in the case of strengthened glass. This failure mode represents one of several field failure modes observed in mobile devices. | |
| language | English | |
| title | IEC 61747-40-5 | num |
| title | Liquid crystal display devices – Part 40-5: Mechanical testing of display cover glass for mobile devices – Strength against dynamic impact by a sharp object with the specimen rigidly supported - Edition 1.0 | en |
| type | standard | |
| page | 18 | |
| status | Active | |
| tree | IEC - International Electrotechnical Commission:;2018 | |
| contenttype | fulltext |
