Now showing items 1-20 of 4693

      • MIL-F-40055A 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1967
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: – This specification covers one type of signal flag set designated as the M-113 Flag Set. The flag set shall consist of two MC-44 flags (each flag to have an MC-43 flagstaff) and one CS-16 case.
        – The flag ...
      • MIL-C-3636C 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1969
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers the requirements for cords and tassels to be used with flags (see 6.1).
        Cords and tassels shall be of the following classes, as specified (see 6.2):
            Class 1 - ...
      • MIL-F-40045C 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1970
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers one type of flag set used by tanks. The set consists of three flags with flagstaffs and flag case.
        The M-238 flag set consists of the following components:
            Flag set, Signal ...
      • MIL-P-13850C 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1970
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers one type and size of panel marker in two colors. Panel marker AL-121 is bleached white and panel marker AL-122 is dyed black. Intended Use: The panels covered by this specification ...
      • MIL-P-40061B 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1970
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers one type and size of signal panel which is fabricated from laminated fluorescent dyed nylon cloth with an integral pocket for protection of the panel in storage. Intended Use: Panel ...
      • MIL-C-3680C 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1972
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers cotton duck protective cases for flags and guidons used by the Department of Defense.
        The cases covered by this specification shall be of the following types as specified (see 6.2): ...
      • MIL-P-14634A 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1974
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers one type and size of red cross panel marker used by the Department of Defense. Intended Use: - Panel markers covered by this specification are intended to be used for ground to air ...
      • MIL-D-14644 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1974
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers the requirements of the Presidential Medal of Freedom with Distinction and the Presidential Medal of Freedom. Intended Use: The decorations covered by this specification are intended ...
      • MIL-D-10254C 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1975
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers the Netherlands Orange Lanyard Decoration consisting of a braided cotton cord with self bound loops at each end and a swivel snap attached to one of the loops. Intended Use: The ...
      • MIL-F-2071D 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1976
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: – This specification covers one type and size of US National Flag used for grave decorating. Intended Use: The flag is intended for use in decorating the graves of deceased Military personnel in National ...
      • MIL-I-14646 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1976
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers one type of insignia worn on the shoulder loop to designate combat leader. Intended Use: - Shoulder loop insignia covered by this specification are intended to be worn by Army ...
      • MIL-P-1577D 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1976
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers one type of Red Cross panel marker, 8 feet 6 inches long by 19 feet 6 inches wide, made from laminated vinyl-nylon cloth. Intended Use: The red cross panel marker covered by this ...
      • MIL-S-14630B 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1977
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers two types of attachments for streamers. Intended Use: The streamer set attachment is intended to be used to display US decoration and campaign streamers. The type I header is to be ...
      • MIL-F-40054B 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1978
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers the M-133 flag set.
        The M-133 flag set shall consist of the following components:
            Component A - Flag, Signal MC-129     Component B - Flagstaff MC-130


        Intended ...
      • MIL-B-3461G 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1979
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers metal uniform and cap buttons with embossed designs used by the Military Departments. Intended Use: The buttons covered by this specification are intended to be worn on certain ...
      • MIL-S-14642A 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1980
        Organization : ARMY - IH - Institute of Heraldry
      • MIL-A-14641B 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1981
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers one type of aiguillette used by the United States Air Force Command Bands. Intended Use: The aiguillette covered by this specification is intended to be used by the United States ...
      • MIL-S-11874D 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1982
        Organization : ARMY - IH - Institute of Heraldry
      • MIL-C-14637A 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1982
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers one type of plastic flag case for use with the interment flag. Intended Use: Cases covered by this specification are intended to be used to contain the folded interment flag which ...
      • MIL-F-40048C 

        Type: standard
        Source: ARMY - IH - Institute of Heraldry:;1984
        Organization : ARMY - IH - Institute of Heraldry
        Abstract: This specification covers wood and metal flagstaffs, and flagstaff heads.
        Flagstaffs and flagstaff heads shall be of the following types, components, sizes, classes and style as specified. (see 6.2 and 6.3.) ...