درباره ما
Search
CSV
RISASHRAE LO-09-067: Field Measurements of Innovative Indoor Shading Systems in a Full-Scale Office Testbed
Abstract: ABSTRACT
The development of spectrally selective low-e glass with its superior solar control and high daylight admission has led to widespread use of large-area, "transparent" or visually clear glass windows in commercial building facades. This type of façade can provide significant inherent daylighting potential (ability ...
The development of spectrally selective low-e glass with its superior solar control and high daylight admission has led to widespread use of large-area, "transparent" or visually clear glass windows in commercial building facades. This type of façade can provide significant inherent daylighting potential (ability ...
ASHRAE LV-11-C048: The Role of Modeling When Designing for Absolute Energy Use Intensity Requirements in a Design-Build Framework
Abstract: ABSTRACT
The Research Support Facilities (RSF) building at the National Renewable Energy Laboratory is a 220,000 square foot office building designed to hold 822 occupants, to use 35.1 kBTU/sf/yr, to use half the energy of an equivalent minimally codecompliant building, and to produce as much renewable energy as it consumes on ...
The Research Support Facilities (RSF) building at the National Renewable Energy Laboratory is a 220,000 square foot office building designed to hold 822 occupants, to use 35.1 kBTU/sf/yr, to use half the energy of an equivalent minimally codecompliant building, and to produce as much renewable energy as it consumes on ...
ASHRAE OR-10-018: ASHRAE Standard 90.1 Metal Building U-Factors—Part 2: A Systems Based Approach for Predicting the Thermal Performance of Single Layer Fiberglass Batt Insulation Assemblies
Abstract: INTRODUCTION
During the late 1990's, the American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE) Standing Standard Project Committee (SSPC) 90.1 Envelope Subcommittee incorporated specific maximum allowable Ufactors (the overall heat transfer coefficients) for metal building roofs and walls into ANSI/...
During the late 1990's, the American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE) Standing Standard Project Committee (SSPC) 90.1 Envelope Subcommittee incorporated specific maximum allowable Ufactors (the overall heat transfer coefficients) for metal building roofs and walls into ANSI/...
ASHRAE LO-09-059: Electrical Energy Impacts of Residential Building Codes for Homes in Austin, Texas
Abstract: INTRODUCTION
The City of Austin has considered energy efficiency for new construction an important issue since the adoption of its first building energy code, the 1983 Model Energy Code (MEC), in late ...
The City of Austin has considered energy efficiency for new construction an important issue since the adoption of its first building energy code, the 1983 Model Energy Code (MEC), in late ...
ASHRAE FUNDAMENTALS IP CH 3: FLUID FLOW
Abstract: HEAT transfer is energy in transit because of a temperature difference. The thermal energy is transferred from one region to another by three modes of heat transfer: conduction, radiation, and convection. Heat transfer is ...
ASHRAE APPLICATION SI CH 19: DATA PROCESSING AND TELECOMMUNICATION FACILITIES
Abstract: Overview
Environmental requirements of datacom equipment vary depending on the type of equipment and/or manufacturer. However, a consortium of server manufacturers has agreed on a set of four standardized conditions (Classes 1 to 4), listed in Thermal Guidelines for Data Processing Environments (ASHRAE 2008). A fifth classifica...
Environmental requirements of datacom equipment vary depending on the type of equipment and/or manufacturer. However, a consortium of server manufacturers has agreed on a set of four standardized conditions (Classes 1 to 4), listed in Thermal Guidelines for Data Processing Environments (ASHRAE 2008). A fifth classifica...