Abstract: This standard describes sodium polyphosphate, glassy, for use in the treatment of potable water, wastewater, and reclaimed water. This material is also known as sodium hexametaphosphate, sodium tetrapolyphosphate, and ...

Abstract: This standard describes the material and application requirements for fusion-bonded epoxy coatings for the interior and exterior of steel water pipe, special sections, welded joints, connections, and fittings for steel water pipelines installed underground or underwater. Fusion-bonded epoxy coatings are heat-activated, chemically cured coating syst...

Abstract: This standard describes the various types and classes of cold-water fireserviceType meters in sizes 3 in. (80 mm)* through 10 in. (250 mm) and the materials and workmanship used in their fabrication. A fire-service meter ...

Abstract: This standard describes 3-in. through 64-in. (80-mm through 1,600-mm) flanged ductile-iron pipe with ductile-iron or gray-iron threaded flanges for potable water, wastewater, and reclaimed water service. Flanged pipe and ...

Abstract: This standard describes the various types and classes of cold-water compoundType meters in sizes 2 in. (50 mm) through 8 in. (200 mm), and the materials and workmanship used in their fabrication. Compound meters shall ...

Abstract: This standard describes materials and installation procedures for polyethylene encasement to be applied to underground installations of ductile-iron pipe. This standard also may be used for polyethylene encasement of ...

Abstract: The purpose of this standard is to provide minimum requirements for the design, construction, inspection, and testing of new welded carbon steel tanks for the storage of water at atmospheric pressure.
Tank roofs. All tanks storing potable water shall have roofs. Tanks storing nonpotable water may be constructed without roofs.
Items not cove...

Abstract: This standard describes chlorinated lime, calcium hypochlorite, and sodium hypochlorite for use in water, wastewater, and reclaimed water treatment.
Purpose
The purpose of this standard is to provide ...

Abstract: This standard for disinfection of water-storage facilities describes materials, facility preparation, application of disinfectant to interior surfaces of facilities, and sampling and testing for the presence of coliform ...

Abstract: This standard describes the various types and classes of propeller meters in sizes 2 in. (50 mm) through 72 in. (1,800 mm) for waterworks applications. These meters register by recording the revolutions of a propeller set ...