Defence Standards: Recent submissions

Now showing items 1281-1300 of 43216

    • MIL-PRF-39007/11J VALID NOTICE 1 

      Type: standard
      Source: ARMY - CR - US Army Communications Electronics Command:;2013
      Organization : ARMY - CR - US Army Communications Electronics Command

    • MIL-PRF-55514/1C 

      Type: standard
      Source: ARMY - CR - US Army Communications Electronics Command:;2002
      Organization : ARMY - CR - US Army Communications Electronics Command

    • MIL-DTL-11484/98E 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;1996
      Organization : ARMY - IH - Institute of Heraldry
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ...

    • A-A-59126/26B 

      Type: standard
      Source: ARMY - CR - US Army Communications Electronics Command:;2012
      Organization : ARMY - CR - US Army Communications Electronics Command

    • DSCC-VID-V62/09627 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2009
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents the general requirements of a high performance digital receiver microcircuit, with an operating temperature range of -55°C to +125°C.

    • MIL-DTL-11484/185B VALID NOTICE 3 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2013
      Organization : ARMY - IH - Institute of Heraldry

    • A-A-59504 

      Type: standard
      Source: DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code:;2000
      Organization : DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code
      Abstract: This commercial item description (CID) covers transparent cellulose acetate sheet (sheeting), 0.0015 inches nominal thickness, with a matte finish on one side and an adhesive backing on the other side. The cellulose acetate ...

    • MIL-PRF-89040A ADMIN NOTICE 1 

      Type: standard
      Source: DOD - MP - The National Geospatial-Intelligence Agency, (DepSO):;2004
      Organization : DOD - MP - The National Geospatial-Intelligence Agency, (DepSO)

    • NACA-TN-1705 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1948
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: INTRODUCTION
      In structural members, discontinuities such as holes produce stress concentrate ions but the effects of plastic flow on such stress concentrations, especially under repeated loads, are not generally known. ...
      Subject(s) : ALUMINUM ALLOYS , SHEET - ALCOA 24ST , EFFECT OF HOLES , LOADS - PLATES , FLAT , PLATES - PLASTICITY , PLATES - TENSION , PLATES , FLAT - STRESSES , STRESS DISTRIBUTION - HOLES ,

    • MIL-STD-1322 -723 

      Type: standard
      Source: NAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD):;1969
      Organization : NAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD)

    • MSFC-SPEC-2919 CHG NOTICE 1 

      Type: standard
      Source: MSFC - NASA - MSFC - Marshall Space Flight Center:;1999
      Organization : MSFC - NASA - MSFC - Marshall Space Flight Center
      Abstract: The scope of this document is to define the performance, design, fabrication and verification requirements for the ProSEDS Deployer System; the general requirements for associated ground support equipment (GSE). Section ...

    • DSCC-VID-V62/04651 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2006
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents the general requirements of a high performance rail to rail, low power, operational amplifier, microcircuit, with an operating temperature range of -40°C to +125°C.

    • MIL-E-19933E (1) 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1982
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)

    • NASA-LLIS-0031 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1992
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Description of Driving Event:
      Post launch checkout and semi-annual GOX vent arm maintenance requires technicians to service the GOX vent arm upper hinge and associated flexhoses. The GOX vent arm upper ...
      Subject(s) : Facilities , Ground Equipment , Ground Operations , Hardware , Human Factors , Industrial Operations , Personal Protective Equipment , Safety & Mission Assurance ,

    • MS16633 REV D 

      Type: standard
      Source: DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code:;2012
      Organization : DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code

    • MIL-PRF-39016/26F 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2005
      Organization : DLA - CC - DLA Land and Maritime

    • NASA-LLIS-0963 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1995
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Description of Driving Event:
      Computer mathematical models had shown the engine to be sensitive to small changes in propellant conditions, and that timing relative to opening the propellant valves was ...
      Subject(s) : Configuration Management , Cryogenic Systems , Ground Equipment , Hardware , Launch Vehicle , Parts Materials & Processes , Safety & Mission Assurance , Spacecraft , Test Article , Test Facility ,

    • MIL-DTL-83723G 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2009
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification covers the general requirements for environment resisting, circular, electrical connectors and their associated contacts and accessories. These connectors must utilize crimp or solder contacts and be ...
      Subject(s) : Bayonet coupling , Threaded coupling ,

    • DODD 7000.14-R VOL 7B CHAP 22 

      Type: standard
      Source: DODD - DoD Directives Service:;2011
      Organization : DODD - DoD Directives Service
      Abstract: GENERAL
      The Secretary of a Military Department is authorized to provide support for persons participating in a funeral honors detail, including retired military members in the form of either transportation (or reimbursement ...

    • SMD-5962-89783 REV B 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B micrcircuits in accordance with MIL-PRF-38535, appendix A. Intended Use: Microcircuits conforming to this drawing ...