Defence Standards: Recent submissions

Now showing items 281-300 of 43216

    • A-A-55062A 

      Type: standard
      Source: DLA - CT - DLA Troop Support - Clothing & Textile Items of Supply:;1992
      Organization : DLA - CT - DLA Troop Support - Clothing & Textile Items of Supply
      Abstract: The General Services Administration has authorized the use of this Commercial Item Description in preference to MIL-S-83791.

    • MIL-STD-1668B 

      Type: standard
      Source: NAVY - NU - Navy Clothing and Textile Research Facility:;1988
      Organization : NAVY - NU - Navy Clothing and Textile Research Facility

    • MIL-B-913/9 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1993
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ...

    • MIL-STD-1320 -65 NOTICE 1 

      Type: standard
      Source: NAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD):;1982
      Organization : NAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD)

    • A-A-59652B 

      Type: standard
      Source: DLA - GS4 - DLA Aviation - Richmond:;2011
      Organization : DLA - GS4 - DLA Aviation - Richmond
      Abstract: This commercial item description (CID) covers government acquisition requirements for complete (cone with rollers and cup) single row, tapered, roller bearings with steep angle, flanged cup (type TSSF) for general purpose ...
      Subject(s) : Bore , Cone , Cup , Load , Width ,

    • NASA-LLIS-1804 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2007
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Abstract:
      Preferred Practice for Design & Test. Worst Case Analysis (WCA) is a uniform, disciplined, systematic approach to circuit analysis that determines whether each circuit and ...

    • MIL-STD-1490G 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1992
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center

    • NASA-TP-3637 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1997
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: The computer codes, AER02S and WINGDES, are now widely used for the analysis and design of airplane lifting surfaces under conditions that tend to induce flow separation. These codes have undergone continued development ...
      Subject(s) : AERODYNAMIC , AERODYNAMICS , ANALYSIS , BOUNDARY , COMPUTER , DRAG , FLOW , LAYER , LIFT , MANUALS , NUMERICAL , OPTIMIZATION , PREDICTIONS , PROGRAMS , SEPARATED , SEPARATION , USER ,

    • W-C-596/65D 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2001
      Organization : DLA - CC - DLA Land and Maritime

    • NASA-LLIS-1514 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2005
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Abstract:
      For the Chandra thermal-plasma environments interactions, the 1992 Program re-baseline removed two instruments, one of which required active thermal control. The orbit for Chandra was changed ...
      Subject(s) : Accident Investigation , Configuration Management , Environment , Extra-Vehicular Activity , Flight Equipment , Hardware , Mishap Reporting , NASA Standards , Parts Materials & Processes , Payloads , Policy & Planning , Program and Project Management , Risk Management/Assessment , Safety & Mission Assurance , Spacecraft , Standard , Test & Verification ,

    • W-C-596/60C VALID NOTICE 1 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime

    • NACA-TR-534 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1936
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: This report presents the results of wind tunnel tests of a wing in combination with each of three sizes of Fowler flap. The purpose of the investigation was to determine the aerodynamic characteristics as affected by flap ...
      Subject(s) : AERODYNAMIC , CHARACTERISTICS , CHORDS , COEFFICIENTS , DIMENSIONS , DOWNWASH , DRAG , FLAPS , GEOMETRY , LIFT , LOADS , LOCATION , MOMENTS , PITCHING , POSITION , RUNS , SIZE , TAKEOFF , WING , WINGS ,

    • JAN-N-412A 

      Type: standard
      Source: ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center:;1948
      Organization : ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center
      Abstract: This specification was approved by the Department of the Army, the Navy, and the Air Force for use of procurement services of the respective Departments. Intended Use: —Powdered nickel covered by this ...

    • NASA-LLIS-6416 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2012
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: This lessons learned addresses handling, fabrication, integration and test issues identified during the use of Gore SpaceWire cable, part number GSC-05-82730-00, size AWG26. This wire was used in flight hardware intended ...
      Subject(s) : Additional Categories.Communication Systems , Additional Categories.Flight Equipment , Additional Categories.Test & Verification , Additional Categories.Test Article , Manufacturing and Assembly , Safety and Mission Assurance.Product Assurance , Safety and Mission Assurance.Quality , Systems Engineering and Analysis.Engineering design and project processes and standards ,

    • SMD-5962-05241 REV B 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number ...

    • NASA MPR 4000.1 REV H 

      Type: standard
      Source: MSFC - NASA - MSFC - Marshall Space Flight Center:;2009
      Organization : MSFC - NASA - MSFC - Marshall Space Flight Center
      Abstract: PURPOSE
      The purpose of this Marshall Procedural Requirements (MPR) is to establish a consistent method for controlling the receiving, handling, processing, verification, storage, maintenance, and ...

    • MIL-V-24586A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1985
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers the requirements of ¼-inch and ½-inch sized needle valves. Intended Use: Needle valves covered by this specification are intended for use for vent, drain, and fluid sampling ...

    • MSFC-RPT-1407 REV A 

      Type: standard
      Source: MSFC - NASA - MSFC - Marshall Space Flight Center:;1987
      Organization : MSFC - NASA - MSFC - Marshall Space Flight Center

    • DODD 7000.14-R VOL 6A CHAP 15 

      Type: standard
      Source: DODD - DoD Directives Service:;2011
      Organization : DODD - DoD Directives Service
      Abstract: Purpose
      This chapter identifies the reporting requirements and provides guidance on the Defense Working Capital Fund (DWCF) Accounting Report [Accounting Report (Monthly) 1307] (AR(M) 1307).

    • DODD 1430.02 

      Type: standard
      Source: DODD - DoD Directives Service:;2006
      Organization : DODD - DoD Directives Service
      Abstract: PURPOSE
      This Instruction:
      Reissues Reference (a) as a DoD Instruction according to the guidance in Reference (b) and the authority in Reference (c).
      Establishes and implements policy and assigns ...