Defence Standards: Recent submissions

Now showing items 381-400 of 43216

    • A-A-52127 

      Type: standard
      Source: DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code:;1993
      Organization : DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code
      Abstract: This commercial item description covers one type and size of laundry net pin. Intended Use: The laundry net pins are intended for closing laundry net bags. The blunt point precludes the use of these pins for ...

    • NATO STANAG 4248 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1988
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this Agreement is to facilitate the provision of purified water for submarine main lead acid batteries of participating NATO Navies in NATO Naval Bases.

    • MIL-DTL-8878K (1) 

      Type: standard
      Source: DLA - GS5 - DLA Aviation - Richmond:;2009
      Organization : DLA - GS5 - DLA Aviation - Richmond
      Abstract: This specification covers positive safetying turnbuckle component parts.Intended Use: Turnbuckles and component parts are intended for use in the construction of aircraft and aircraft accessories.
      Subject(s) : Wire rope assemblies ,

    • MIL-DTL-11589/254E 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2011
      Organization : ARMY - IH - Institute of Heraldry

    • NACA-RM-L55E23 REV A 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1955
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: INTRODUCTION
      The analysis of the downwash behind wings given in references 1 to 3 has provided a good basis from which the horizontal-tail contribution to the static longitudinal stability can be estimated for wing-body ...

    • DODD 7000.14-R VOL 7A CHAP 30 

      Type: standard
      Source: DODD - DoD Directives Service:;2011
      Organization : DODD - DoD Directives Service
      Abstract: General
      Officers of the Armed Forces of the United States are entitled to an initial uniform allowance as provided in this section.

    • MIL-DTL-3628/251 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2009
      Organization : ARMY - IH - Institute of Heraldry

    • MIL-PRF-24623/5C 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2001
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)

    • A-A-59865 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2010
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID), describes a describes an insulation test set, a portable, high-voltage leakage test set for electrical insulators, measures current leakage across insulation, not capacity current, ...
      Subject(s) : High-voltage , Leakage , Portable ,

    • SMD-5962-86707 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.Intended Use: Microcircuits conforming to this drawing ...

    • MIL-G-4937 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1955
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers an electric, pedestal, carbide tool bit grinding machine.

    • NACA-W-87 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1945
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Transition of the boundary layer from the laminar to the turbulent regime was investigated on the concave side of a plate with a radius of curvature of 3.5 feet. The critical Reynolds number was found to be considerably ...

    • MIL-DTL-3943/354 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2012
      Organization : ARMY - IH - Institute of Heraldry

    • NACA-TN-2412 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1951
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: The tail configurations considered in this paper are sketched in figure 1. The orientation of the tail with respect to a body system of coordinate axes used in the analysis is shown in figure 2(a). Figure 2(b) shows a ...

    • MIL-DTL-1563/18A 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;1997
      Organization : ARMY - IH - Institute of Heraldry
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ...

    • MIL-DTL-14650/5D VALID NOTICE 1 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2013
      Organization : ARMY - IH - Institute of Heraldry

    • DODD 1100.06 03/13/07 

      Type: standard
      Source: DODD - DoD Directives Service:;2007
      Organization : DODD - DoD Directives Service
      Abstract: REISSUANCE AND PURPOSE
      This Instruction:
      Reissues Reference (a) as a DoD Instruction in accordance with the authority in Reference (b) and the guidance in Reference (c).
      Establishes policy, provides ...

    • MIL-DTL-11132/53 NOTICE 1 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;1999
      Organization : ARMY - IH - Institute of Heraldry

    • MIL-DTL-3943/102D 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2008
      Organization : ARMY - IH - Institute of Heraldry

    • MSFC-SPEC-50M60166 

      Type: standard
      Source: MSFC - NASA - MSFC - Marshall Space Flight Center:;1966
      Organization : MSFC - NASA - MSFC - Marshall Space Flight Center