Defence Standards: Recent submissions

Now showing items 641-660 of 43216

    • A-A-59399 VALID NOTICE 2 

      Type: standard
      Source: DLA - GS6 - DLA Aviation - Richmond:;2013
      Organization : DLA - GS6 - DLA Aviation - Richmond

    • MIL-B-41826G 

      Type: standard
      Source: DLA - CT - DLA Troop Support - Clothing & Textile Items of Supply:;1989
      Organization : DLA - CT - DLA Troop Support - Clothing & Textile Items of Supply
      Abstract: This specification covers the requirements for unquilted and quilted polyester synthetic fiber battings. Intended Use: The quilted and unquilted batting is intended for use as insulation in clothing, sleeping ...
      Subject(s) : Cold weather clothing liners , Equipage , Insulation , Nonwoven , Sleeping bag ,

    • MIL-M-28787/45B CANC NOTICE 1 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)

    • MIL-PRF-55514/10E 

      Type: standard
      Source: ARMY - CR - US Army Communications Electronics Command:;2013
      Organization : ARMY - CR - US Army Communications Electronics Command

    • NASA-LLIS-4876 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2012
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: A logistics organization uses foundational data elements to produce products such as Logistics Support Analyses. Using a common data infrastructure, such as Source Maintainability & Recoverability (SMR) code charts for all ...

    • SMC-S-005 

      Type: standard
      Source: AIR FORCE - 02 - Air Force Network Integration Center (AFNIC):;2009
      Organization : AIR FORCE - 02 - Air Force Network Integration Center (AFNIC)
      Abstract: This document establishes the baseline requirements for the design, fabrication, assembly, installation, test, inspection, operation, and maintenance of pressure systems used in spacecraft and launch vehicles. It deals ...

    • MIL-DTL-22706G 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1997
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification covers flexible pneumatic ducts and scuff covers for delivery air at temperatures to 600°F as specified in 6.1.
      The products are of the following types and classes:
      Type I - Duct ...
      Subject(s) : Engine start , Hose air , Turbine air ,

    • MIL-DTL-3628/188 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;1996
      Organization : ARMY - IH - Institute of Heraldry

    • MIL-DTL-11484/134D VALID NOTICE 3 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2013
      Organization : ARMY - IH - Institute of Heraldry

    • A-A-54095 

      Type: standard
      Source: DOD - MB - Defense Health Agency, Medical Logistics Division:;1990
      Organization : DOD - MB - Defense Health Agency, Medical Logistics Division
      Abstract: The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Military Specification MIL-P-37042 (DSA-DM) which is cancelled.
      This Commercial Item Description ...

    • MSFC-RPT-1526 

      Type: standard
      Source: MSFC - NASA - MSFC - Marshall Space Flight Center:;1988
      Organization : MSFC - NASA - MSFC - Marshall Space Flight Center

    • DODD 3305.11 CE-01 

      Type: standard
      Source: DODD - DoD Directives Service:;2011
      Organization : DODD - DoD Directives Service
      Abstract: APPLICABILITY AND SCOPE This Instruction applies to OSD, the Military Departments (including the Coast Guard when it is not operating as a Service in the Navy, under agreement with the Department of Homeland Security), ...

    • MIL-T-10798L 

      Type: standard
      Source: DLA - CT - DLA Troop Support - Clothing & Textile Items of Supply:;1990
      Organization : DLA - CT - DLA Troop Support - Clothing & Textile Items of Supply

    • MIL-T-70711 

      Type: standard
      Source: ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center:;1987
      Organization : ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center
      Abstract: This specification covers requirements and quality assurance provisions for parts for Tile, Armor XM3, XM4, XM5, XM6 and XM7. Intended Use: The components covered by this specification are intended for use ...
      Subject(s) : Armor , Bradley , Plate , Reactive , Tiles , Welds ,

    • DSCC-VID-V62/04650 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents the general requirements of a high performance 1394 Integrated PHY and Link Layer controller for SBP-2 products and DPP products microcircuit, with an operating temperature range of -40ºC to +85ºC.

    • A-A-59440C 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This commercial item description (CID) covers the general requirements for cock-valves and valves. Requirements for specific cock-valves and valves are covered in the individual CID specification sheets. Cock-valves and ...

    • DSCC-VID-V62/04695 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents the general requirements of a high performance dual 4-bit binary counter microcircuit, with an operating temperature range of -40°C to +105°C.

    • MIL-DTL-11484/136C 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;1996
      Organization : ARMY - IH - Institute of Heraldry
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ...

    • NASA-TP-1917 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1981
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: An experimental investigation was conducted to evaluate cornering characteristics of the 32 x 8.8 nose gear tire of the space shuttle orbiter. Data were obtained on a dry concrete runway at nominal ground speeds ranging ...
      Subject(s) : AERODYNAMIC CHARACTERISTICS , AERODYNAMIC LOADS , COEFFICIENT OF FRICTION , GROUND SPEED , LANDING GEAR , MECHANICAL PROPERTIES , NOSE TIPS , SPACE SHUTTLE ORBITERS ,

    • MIL-STD-804C NOTICE 2 

      Type: standard
      Source: ARMY - CR - US Army Communications Electronics Command:;1995
      Organization : ARMY - CR - US Army Communications Electronics Command