Defence Standards: Recent submissions

Now showing items 781-800 of 43216

    • SMD-5962-88581 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2006
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.Intended Use: Microcircuits conforming to this drawing ...

    • MIL-PRF-19500/538F 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification covers the performance requirements for NPN silicon, power transistors. Four levels of product assurance are provided for each device type as specified in MIL-PRF-19500. Two levels of product assurance ...

    • MIL-DTL-3628/196 NOTICE 1 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;1999
      Organization : ARMY - IH - Institute of Heraldry

    • MSFC-SPEC-40M37496 REV F 

      Type: standard
      Source: MSFC - NASA - MSFC - Marshall Space Flight Center:;1970
      Organization : MSFC - NASA - MSFC - Marshall Space Flight Center

    • COMDTINST M16798.15 

      Type: standard
      Source: USCG - United States Coast Guard:;1987
      Organization : USCG - United States Coast Guard
      Abstract: PURPOSE. This publication is intended for use as the text for the Auxiliary Specialty Course in Navigation.

    • MIL-DTL-3688D 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2005
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers a type of wax emulsion suitable for use as a rust inhibiting coating for general weatherproofing when applied to articles (see 6.1). Intended Use: The rust inhibiting wax ...
      Subject(s) : Cartridge cases , Coating , Preservative , Weatherproofing ,

    • A-A-59815 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2008
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This Commercial Item Description (CID) provides performance requirements for paint cartridge dispensing systems. It does not define equipment for dispensing paint from cartridges (e.g., manual guns, pneumatic wall dispensers, ...

    • MIL-PRF-27/369B 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime

    • NACA-RM-E51A25 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1951
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: INTRODUCTION
      Experience has shown that the performance of a turbojet combustor is dependent on flight conditions and that poor performance is generally encountered at high altitudes and at low engine ...

    • OO-S-256/6A VALID NOTICE 2 

      Type: standard
      Source: DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code:;2006
      Organization : DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code

    • NASA-LLIS-0238 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1993
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Description of Driving Event:
      Exhausters were running to provide simulation of altitude conditions in a combustor rig when the mishap occurred. The equipment operators were short-handed and, as a result, ...
      Subject(s) : Facilities , Industrial Operations , Pressure Vessels ,

    • MIL-DTL-62740A VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command

    • NATO AOP-61 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2011
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: This AOP applies to all software that is part of the NATO Technical Shareable Software suite developed under STANAG 4683 ("NATO Technical Shareable Software") unless an exception has been explicitly authorized by SG/2.

    • MIL-C-28754/23F 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1991
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for acquiring the frame described herein shall consist of this specification and the latest ...

    • MIL-DTL-3943/95D 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2007
      Organization : ARMY - IH - Institute of Heraldry

    • MIL-E-16663A (1) 

      Type: standard
      Source: NAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD):;1976
      Organization : NAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD)

    • MIL-DTL-7961D 

      Type: standard
      Source: DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code:;2007
      Organization : DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code
      Abstract: This specification covers functional, self-testing, press to test indicator lights. Intended Use: The light assemblies are intended for use as warning indicator lights to be used in conjunction with a component ...
      Subject(s) : Dimmer light assembly , Indicator , light assembly , Light assembly , Indicator , Light assembly , press to test , Press to test light assembly ,

    • A-A-59422 

      Type: standard
      Source: DLA - GS6 - DLA Aviation - Richmond:;2000
      Organization : DLA - GS6 - DLA Aviation - Richmond
      Abstract: This commercial item description (CID) covers mechanically driven metalworking machines used for performing punching, shearing, notching, and coping operations on steel bars, structural shapes, and plates of the dimensions ...

    • COMDTINST 12831.1 

      Type: standard
      Source: USCG - United States Coast Guard:;1987
      Organization : USCG - United States Coast Guard
      Abstract: PURPOSE. This Instruction provides information on the provisions of the Federal Employees' Retirement System (FERS) concerning deposits for military service performed after 1956.

    • NASA-LLIS-3376 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2011
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Abstract:
      Multiple problems were uncovered with a launch display application software program. Inadequate unit and integrated software testing can result in delivering a poor quality product. It is ...
      Subject(s) : Ground processing and manifesting , Ground support systems , Launch support systems , Software Engineering , Training and simulation systems ,