Show simple item record

CIRCUIT BREAKERS, MOLDED CASE; BRANCH CIRCUIT AND SERVICE

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:37:39Z
date available2017-09-04T16:37:39Z
date copyright04/18/2013
date issued2013
identifier otherVFZECFAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/101130
description abstractThis specification covers the general requirements and test procedures for molded case circuit breakers which fall within the general parameters specified in table XVI which are specifically designed to provide service-entrance, feeder, meter-service, or branch circuit protection and rated at not more than 4,000 amperes and 600 volts ac, 60 hertz (Hz)Intended Use: Thermal magnetic circuit breakers. Thermal magnetic uncompensated circuit breakers.Thermal magnetic circuit breakers are especially well suited for overload protection of conductors when circuit breakers are exposed to similar ambient temperatures because the circuit breaker continuous current rating changes in about the same ratio as the average conductor rating changes with the ambient temperatures. The magnetic trip portion of the circuit breaker offers short circuit protection. Thermal magnetic compensating breakers. Ambient compensating circuit breakers provide overload and short circuit protection but has temperature compensating elements which counteract the effect of ambient temperature changes thereby maintaining the calibrated current setting throughout a temperature range. Typical applications are a circuit breaker located outside and protecting wire in a temperature controlled building; circuit breaker is exposed to changing temperature conditions and is protecting underground cable; overload protection of conductors are not of prime importance or protection of a portable generator designed to operate throughout varied temperature extremes. Magnetic circuit breakers. Magnetic circuit breakers are available in the same operating characteristics as ambient compensating. The intended use is the same as in 6.1.1.1 and 6.1.1.2. 6.1.3 Fused circuit breakers. Fused circuit breakers incorporate fuses or current limiters in series with the circuit breaker elements to increase the interrupting capacity of a circuit breaker.
languageEnglish
titleW-C-375Enum
titleCIRCUIT BREAKERS, MOLDED CASE; BRANCH CIRCUIT AND SERVICEen
typestandard
page25
statusActive
treeDLA - CC - DLA Land and Maritime:;2013
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record