درباره ما
Search
CSV
RISAPI MPMS 2.8B: Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 8B - Recommended Practice for the Establishment of the Location of the Reference Gauge Point and the Gauge Height of Tanks on Marine Tank Vessels - First Edition
Abstract: Scope and Field of Application
This recommended practice is intended as a guide for establishing reference gauge heights during calibration of marine tank vessels. In many cases this calibration is ...
This recommended practice is intended as a guide for establishing reference gauge heights during calibration of marine tank vessels. In many cases this calibration is ...
API TR 11L: Design Calculations for Sucker Rod Pumping Systems (Conventional Units) - Fifth Edition
Abstract: Introduction
In 1954, a group of users and manufacturers of sucker rod pumping equipment undertook a study in depth of the many complex problems associated with this means of lifting fluid from a well. ...
In 1954, a group of users and manufacturers of sucker rod pumping equipment undertook a study in depth of the many complex problems associated with this means of lifting fluid from a well. ...
API TR 17TR2: The Ageing of PA-11 in Flexible Pipes - First Edition
Abstract: In the construction of a flexible pipe, an inner polymeric pressure sheath is the only layer which seals the conveyed fluid within the pipe structure. Therefore, its integrity is crucial to safe and reliable operation. ...
API RP 1167: Pipeline SCADA Alarm Management - First Edition
Abstract: Scope Limitations
This document is not intended to be a step by step set of instructions on how to build an alarm management system. Each pipeline operator has a unique operating philosophy and will ...
This document is not intended to be a step by step set of instructions on how to build an alarm management system. Each pipeline operator has a unique operating philosophy and will ...
API RP 2X: Recommended Practice for Ultrasonic and Magnetic Examination of Offshore Structural Fabrication and Guidelines for Qualification of Technicians - Fourth Edition
Abstract: This recommended practice (RP) for nondestructive examination (NDE) of offshore structural fabrication and guidelines for qualification of personnel contains guidance on NDE methods which have evolved from fabrication ...
API RP 10B-4: Recommended Practice on Preparation and Testing of Foamed Cement Slurries at Atmospheric Pressure - First Edition; ISO 10426-4:2003 Adoption
Abstract: This part of ISO 10426 defines the methods for the generation and testing of foamed cement slurries and their corresponding unfoamed base cement slurries at atmospheric pressure.
API API/EI MPMS 19.5: Manual of Petroleum Measurement Standards Chapter 19.5 - EI Hydrocarbon Management HM 65 Atmospheric hydrocarbon emissions from marine vessel transfer operations - First Edition
Abstract: This standard provides methods for estimating evaporative loss from marine vessel transfer operations. Specifically, this standard addresses:
1) loading stock into:
a) ship or ocean barges, or
b) shallow draft ...
1) loading stock into:
a) ship or ocean barges, or
b) shallow draft ...
API MPMS 10.2: Manual of Petroleum Measurement Standards Chapter 10.2 Standard Test Method for Water in Crude Oil by Distillation - THIRD EDITION
Abstract: This test method covers the determination of water in crude oil by distillation.
The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of t...
The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of t...
API RP 9B: Application, Care, and Use of Wire Rope for Oil Field Service - THIRTEENTH EDITION; INCORPORATED ERRATA:APRIL 2012; ERRATA: January 2013
Abstract: This recommended practice (RP) covers typical wire rope applications for the oil and gas industry.
Typical practices in the application of wire rope to oil field service are indicated in Table 1, which shows the sizes ...
Typical practices in the application of wire rope to oil field service are indicated in Table 1, which shows the sizes ...