درباره ما
Search
CSV
RISAPI MPMS 3.2: Manual of Petroleum Measurement Standards Chapter 3-Tank Gauging Section 2-Standard Practice for Gauging Petroleum and Petroleum Products in Tank Cars - FIRST EDITION
Abstract: Tank car contents may be measured by three methods: railroad scale weighing, metering, and liquid level measurement. This standard describes only the equipment for and the procedures of the liquid level method of measurement. ...
API STD 530: Calculation of Heater-tube Thickness in Petroleum Refineries - Seventh Edition
Abstract: This standard specifies the requirements and gives recommendations for the procedures and design criteria used for calculating the required wall thickness of new tubes and associated component fittings for fired heaters ...
API RP 5C5: Recommended Practice on Procedures for Testing Casing and Tubing Connections - Third Edition; ISO 13679:2002 Adoption
Abstract: This International Standard establishes minimum design verification testing procedures and acceptance criteria for casing and tubing connections for the oil and natural gas industries. These physical tests are part of a ...
API RP 75: Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities - Third Edition
Abstract: Applications
This recommended practice is intended for application to offshore oil, gas, and sulphur facilities and associated equipment. This includes well drilling, servicing, production, and pipeline ...
This recommended practice is intended for application to offshore oil, gas, and sulphur facilities and associated equipment. This includes well drilling, servicing, production, and pipeline ...
API STD 602: Gate, Globe, and Check Valves for Sizes DN 100 (NPS 4) and Smaller for the Petroleum and Natural Gas Industries - TENTH EDITION
Abstract: This standard specifies the requirements for a series of compact gate, globe and check valves for petroleum and natural gas industry applications.
It is applicable to valves of:
- nominal diameter sizes DN 8, DN ...
It is applicable to valves of:
- nominal diameter sizes DN 8, DN ...
API TR 939-D: Stress Corrosion Cracking of Carbon Steel in Fuel-Grade Ethanol: Review, Experience Survey, Field Monitoring, and Laboratory Testing - Second Edition
Abstract: FOREWORD
Stress corrosion cracking (SCC) of steel in contact with fuel ethanol has been observed in user terminals, specifically storage tanks and loading/unloading racks prior to blending. SCC has not ...
Stress corrosion cracking (SCC) of steel in contact with fuel ethanol has been observed in user terminals, specifically storage tanks and loading/unloading racks prior to blending. SCC has not ...
API STD 526: Flanged Steel Pressure-relief Valves - Sixth Edition; Incorporates Errata: May 2009; Errata 2: October 2012
Abstract: This standard is a purchase specification for flanged steel pressure-relief valves. Basic requirements are given for direct spring-loaded pressure-relief valves and pilot-operated pressure-relief valves as follows:
— ...
— ...
API RP 2SM: Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring - SECOND EDITION
Abstract: This document applies to synthetic fiber ropes used in the form of taut leg or catenary moorings for both permanent and temporary offshore installations such as:
a) monohull-based floating production, storage, and ...
a) monohull-based floating production, storage, and ...
API PUBL 4677: Fugitive Emissions from Refinery Process Drains Volume I; Fugitive Emission Factors for Refinery Process Drains
Abstract: Scope:
This project develops a set of emission factor tables that can be used to replace the AP-42 emission factor for refinery process drains. The project also develops a two-phase ...
This project develops a set of emission factor tables that can be used to replace the AP-42 emission factor for refinery process drains. The project also develops a two-phase ...
API MPMS 8.4: Manual of Petroleum Measurement Standards Chapter 8.4 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement - THIRD EDITION
Abstract: This practice covers procedures and equipment for obtaining, mixing, and handling representative samples of volatile fuels for the purpose of testing for compliance with the standards set forth for volatility related measurements applicable to light fuels. The applicable dry vapor pressure equivalent range of this practice is 13 to 105 kPa (2 to 16...