Now showing items 1241-1260 of 1822

    • API RP 2MOP 

      Type: standard
      Source: API - American Petroleum Institute:;2010
      Organization : API - American Petroleum Institute
      Abstract: This part of ISO 19901 provides requirements and guidance for the planning and engineering of marine operations, encompassing the design and analysis of the components, systems, equipment and procedures required to perform ...
    • API MPMS 14.7 

      Type: standard
      Source: API - American Petroleum Institute:;2012
      Organization : API - American Petroleum Institute
      Abstract: This standard serves as a reference for the selection, design, installation, operation and maintenance of single-phase dynamic liquid mass measurement systems that operate in the 351.7 kg/m3 to 687.8 kg/m3 ...
    • API PUBL 4654 

      Type: standard
      Source: API - American Petroleum Institute:;1997
      Organization : API - American Petroleum Institute
      Abstract: FOREWORD
      API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL, LAWS AND REGULATIONS SHOULD BE REVIEWED.
      API IS NOT ...
    • API PUBL 4639 

      Type: standard
      Source: API - American Petroleum Institute:;1996
      Organization : API - American Petroleum Institute
      Abstract: FOREWORD
      API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
      API IS NOT ...
    • API PUBL 4623 

      Type: standard
      Source: API - American Petroleum Institute:;1995
      Organization : API - American Petroleum Institute
      Abstract: FOREWORD
      API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
      API IS NOT ...
    • API PUBL 4617 

      Type: standard
      Source: API - American Petroleum Institute:;1995
      Organization : API - American Petroleum Institute
      Abstract: FOREWORD
      API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
      API IS NOT ...
    • API STD DEFINITIONS 

      Type: standard
      Source: API - American Petroleum Institute:;1995
      Organization : API - American Petroleum Institute
      Abstract: PREFACE
      This report contains key definitions of terms used in API surveys and reports such as the Weekly Statistical Bulletin.  Definitions for new products such as RFG and low and high sulfur ...
    • API MPMS 12.1.1 SPANISH ADD 1 

      Type: standard
      Source: API - American Petroleum Institute:;2007
      Organization : API - American Petroleum Institute
    • API PUBL 4657 

      Type: standard
      Source: API - American Petroleum Institute:;1997
      Organization : API - American Petroleum Institute
      Abstract: Scope:
      This report, sponsored by the American Petroleum Institute (API), presents the results of laboratory and field studies on field methods for the measurement of geochemical ...
    • API BULL E1 

      Type: standard
      Source: API - American Petroleum Institute:;2000
      Organization : API - American Petroleum Institute
      Abstract: FOREWORD
      Under sections 311 and 312 of the Superfund Amendments and Reauthorization Act of 1986 (SARA Title III), also known as the Emergency Planning and Community Right to Know Act of 1986 (EPCRA) (42 U.S.C. ...
    • API MPMS 11.5.3 

      Type: standard
      Source: API - American Petroleum Institute:;2009
      Organization : API - American Petroleum Institute
      Abstract: These intraconversion tables are applicable to all crude oils, petroleum products, and petrochemicals.
    • API PUBL 4779 

      Type: standard
      Source: API - American Petroleum Institute:;2007
      Organization : API - American Petroleum Institute
      Abstract: PURPOSE OF THIS GUIDE
      The exploration and production (E&P) industry uses great care during the handling and disposal of the produced water that is generated as part of oil and gas production. However, ...
    • API RP 2003 

      Type: standard
      Source: API - American Petroleum Institute:;2008
      Organization : API - American Petroleum Institute
      Abstract: This recommended practice presents the current state of knowledge and technology in the fields of static electricity, lightning, and stray currents applicable to the prevention of hydrocarbon ignition in the petroleum ...
    • API RP 572 CHINESE 

      Type: standard
      Source: API - American Petroleum Institute:;2009
      Organization : API - American Petroleum Institute
      Abstract: 1 Scope
      This Recommended Practice (RP) covers the inspection of pressure vessels. It includes a description of the various types of pressure vessels and the standards for their construction and maintenance. The ...
    • API PUBL 4684 

      Type: standard
      Source: API - American Petroleum Institute:;1999
      Organization : API - American Petroleum Institute
    • API MPMS 12.2.5 

      Type: standard
      Source: API - American Petroleum Institute:;2006
      Organization : API - American Petroleum Institute
      Abstract: This part provides standardized calculation methods for the quantification of liquids and the determination of base prover volumes under defined conditions, regardless of the point of origin or destination or units of ...
    • API PUBL 4678 

      Type: standard
      Source: API - American Petroleum Institute:;1999
      Organization : API - American Petroleum Institute
      Abstract: Scope:
      It was originally intended that a three-zone emissions model be developed with the ability to estimate VOC emissions from a falling film, water seal, and channel located ...
    • API PUBL 4613 

      Type: standard
      Source: API - American Petroleum Institute:;1994
      Organization : API - American Petroleum Institute
      Abstract: Scope:
      FOREWORD
      API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS ...
    • API MPMS 2.2B 

      Type: standard
      Source: API - American Petroleum Institute:;2007
      Organization : API - American Petroleum Institute
      Abstract: This standard describes measurement and caiculation procedures for determining the diameters of u p right welded (laphutt) cylindrical tanks, or vertical Cylindrical tanks, with a smooth outside surface and either floating ...
    • API RP 1109 

      Type: standard
      Source: API - American Petroleum Institute:;2010
      Organization : API - American Petroleum Institute
      Abstract: This recommended practice (RP) addresses the permanent marking of hazardous liquid pipeline transportation facilities. It covers the design, message, installation, placement, inspection, and maintenance of markers and signs ...