درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 1501-1520 of 1822
-
API MPMS 11.2.2M
Abstract: The purpose of this standard is to correct hydrocarbon volumes metered under pressure to the corresponding volumes at the equilibrium pressure for the metered temperature. This standard contains compressibility factors ... -
API PUBL 4628
Abstract: Scope:
The purpose of this Guidance Manual is to provide methodologies for consequence analysis purposes. That is, given a potential or after-the-fact set of circumstances for the ... -
API RP 545
Abstract: API RP 545, First Edition, Recommended Practice for Lightning Protection of Aboveground Storage Tanks for Flammable or Combustible Liquids, replaces the requirements of API 2003 regarding lightning protection for ... -
API RP 1113
Abstract: A pipeline supervisory control center is a facility where the function of centralized monitoring and controlling of a pipeline system occurs.
This document focuses on the design aspects that may be considered appropriate ... -
API PUBL 935
Abstract: FOREWORD
API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the accuracy and reliability of the data contained in them; however, the Institute makes no ... -
API SPEC 17F
Abstract: This part of ISO 13628 is applicable to design, fabrication, testing, installation and operation of subsea production control systems.
This part of ISO 13628 covers surface control system equipment, subsea-installed ... -
API STD 11D3
Abstract: This part of ISO 15136 provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings and repair of progressing cavity pump surface-drive systems for use in ... -
API SPEC 6A
Abstract: Purpose
This International Standard specifies requirements and gives recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, ... -
API MPMS 19.3 PART B
Abstract: This test method may be used to establish evaporative rim-seal loss factors for rim seals used on external and internal floating-roof tanks. The test method involves passing a controlled flow rate of air through a test ... -
API MPMS 12.2.1
Abstract: This document provides standardized calculation methods for the quantification of liquids and the determination of base prover volumes under defined conditions, regardless of the point of origin or destination or the units ... -
API STD 598 RUSSIAN
Abstract: This standard covers inspection, examination, supplementary examinations, and pressure test requirements for resilient-seated, nonmetallic-seated (e.g., ceramic), and metal-to-metal-seated valves of the gate, globe, ... -
API RP 2A-WSD
Abstract: FOREWORD
This Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms contains engineering design principles and good practices that have evolved during the ... -
API PUBL 4663
Abstract: Scope
This manual focuses on remediation of typical spill sites on common soils and landscapes. The information and concepts provided are applicable to the remediation of some pit sites and some large spill ... -
API PUBL 4674
Abstract: FOREWORD
API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
API IS NOT ... -
API RP 520 PT II
Abstract: This recommended practice covers methods of installation for pressure-relief devices for equipment that has a maximum allowable working pressure (MAWP) of 15 psig (1.03 bar g or 103 kPA) or greater. Pressure-relief valves ... -
API RP 13L
Abstract: This standard is a written summary of basic training and knowledge that an employee or contractor shall possess to be identified as a drilling fluids technologist. Levels of understanding have been generally outlined, ...