درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 1801-1820 of 1822
-
API SPEC 20B
Abstract: Purpose
This API standard specifies requirements for the qualification and production of open die shaped forgings for use in API service components in the petroleum and natural gas industries when ... -
API SPEC 7NRV
Abstract: This standard was formulated to provide the minimum acceptable requirements for Drill String Non-return Valve (NRV) equipment. It covers Drill String Non-return Valves, Non-return Valve Subs, Non-return Valve landing ... -
API TR 10TR4
Abstract: Introduction
The proper centralization of the casing for primary cementing has long been a critical step in quality cementing. Lack of proper centralization can lead to severe cementing problems, including lack of zonal ...API RP 8B
Abstract: This International Standard gives guidelines and establishes requirements for inspection, maintenance, repair and remanufacture of items of hoisting equipment used in drilling and production operations, in order to maintain ...API PUBL 4465
Abstract: A number of technologies for the treatment of listed petroleum refinery oily wastes were evaluated in this study. The technologies studied were mechanical treatment (filtration), solvent extraction, thermal treatment ...API MPMS 19.3 PART H
Abstract: This standard illustrates how other standards of the API MPMS, Chapter 19.3, referenced below, are integrated into the overall certification program, and it presents procedures for the evaluations to be performed by API ...API MPMS 6.6
Abstract: Scope and Field of Application
This publication deals with the operation and special arrangements of meters, provers, manifolding, instrumentation, and accessory equipment used to measure the loading ...API STD 598
Abstract: This standard covers inspection, examination, supplementary examinations, and pressure test requirements for resilient-seated, nonmetallic-seated (e.g. ceramic), and metal-to-metal-seated valves of the gate, globe, plug, ...API MPMS 12.2.2
Abstract: This document provides standardized calculation methods for the quantification of liquids and the determination of base prover volumes under defined conditions, regardless of the point of origin or destination or the units ...API PUBL 352
Abstract: FOREWORD
API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
API IS NOT ...API PUBL 4695
Abstract: Scope
This manual covers many aspects of the NPDES permitting process, from the preparation of the permit application through the issuance of the final NPDES permit. The manual describes the development of permit ...API MPMS 5.8
Abstract: General
This document defines the application criteria for UFMs and addresses the appropriate considerations regarding the liquids to be measured. This document addresses the installation, operation, ...API RP 11S5
Abstract: This document covers the application (size and configuration) of electrical submersible cable systems by manufacturers, vendors, or users.