درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 521-540 of 1822
-
API MPMS 22.2
Abstract: Scope: General The testing protocol is limited to single-phase Newtonian fluid flow, and no consideration is given to pulsation effects. Further revisions of this document may include the testing of such meters in wet gas ... -
API MPMS 13.3
Abstract: Scope: This standard establishes a methodology to develop uncertainty analyses for use in writing API Manual of Petroleum Measurement Standards (MPMS) documents that are consistent with the ISO GUM and NIST Technical Note 1297. -
API PUBL 4783
Abstract: Scope: The oil and gas industry has significant connections to the water environment. Water is beneficially used, consumed, generated, reused, recycled, and disposed of over the life cycle of an oil and gas resource. The ... -
API MPMS 17.3
Abstract: Scope: This chapter recommends the water samples and volumes to be taken, the containers to be used, the care and distribution of the samples, and the analytical procedures for use in identifying the probable source(s) of ... -
API RP 5C5
Abstract: Scope: This Recommended Practice (RP) defines tests to determine the galling tendency, sealing performance, and structural integrity of threaded casing and tubing connections. The words “casing” and ... -
API STD 560
Abstract: Scope: This standard specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air preheaters (APHs), fans, and ... -
API RP 90-2
Abstract: Scope: General This document is intended to serve as a guide to monitor and manage annular casing pressure (ACP) in onshore wells, including production, injection, observation/monitoring, and storage wells. This document ... -
API RP 580
Abstract: Scope: Purpose General The purpose of this document is to provide users with the basic minimum and recommended elements for developing, implementing, and maintaining a RBI program. It also provides guidance to owner-users, ... -
API RP 10B-3
Abstract: Scope: General This recommended practice provides procedures for testing well cement slurries and cement blends for use in a deepwater environment or wells drilled in areas with a low seafloor temperature or areas where ... -
API RP 615
Abstract: Scope: This Recommended Practice (RP) provides general guidance on valve selection for the hydrocarbon processing industry (HPI), which includes refineries and petrochemical, chemical, and liquefied natural gas (LNG) plants ... -
API RP 781
Abstract: Scope: General The purpose of a facility security plan (FSP) is to provide the framework to establish a secure workplace. The plan provides an overview of the threats facing the facility and describes the security measures ... -
API RP T-1
Abstract: Scope: This recommended practice is intended to serve as a guide to develop orientation materials for personnel and visitors prior to their first trip offshore. The scope and applicability of this document concludes after ... -
API RP 572
Abstract: Scope: This recommended practice (RP) supplements API 510 by providing pressure vessel inspectors with information that can improve skills and increase basic knowledge of inspection practices. This RP describes inspection ... -
API TR 2574
Abstract: Scope: Applicability This method applies to the measurement of volatile organic compounds (VOC) as total gaseous nonmethane organics (TGNMO), methane and ethane from the air–vapor mixture that is expelled during ... -
API SPEC 15HR
Abstract: Scope: Coverage This specification was formulated to provide for the availability of safe, dimensionally, and functionally interchangeable high-pressure fiberglass line pipe with a pressure rating from 500 lbf/in.2 to 5000 ... -
API RP 1167
Abstract: Scope: This document is intended to provide pipeline operators with recommended industry practices in the development, implementation, and maintenance of an alarm management program. It provides guidance on elements that ... -
API RP 1646
Abstract: Scope: General This Recommended Practice (RP) highlights some of the federal Occupational Safety and Health Administration (OSHA) requirements that may apply to maintenance and construction work in the retail petroleum/convenience ... -
API STD 594
Abstract: Scope: If a product is supplied bearing the API Monogram and manufactured at a facility licensed by API, the requirements of Annex A apply. This standard covers the design, material, face-to-face dimensions, pressure-temperature ... -
API STD 641
Abstract: Scope: This standard specifies the requirements and acceptance criteria for fugitive emission type testing of quarterturn valves. The type testing requirements contained herein are based on elements of EPA Method 21. Valves ... -
API MPMS 20.2
Abstract: Scope: This standard is applicable to single-phase measurement techniques upstream of the custody transfer points where custody transfer conditions are not possible. The standard presents single-phase flow measurement used ...