IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1461-1480 of 2832

    • IEEE Standard for High Data Rate Wireless Multi-Media Networks--Amendment 1: High-Rate Close Proximity Point-to-Point Communications 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: An alternative physical layer (PHY) and a modified medium access control (MAC) layeris defined in this amendment.Two PHY modes have been defined that enable data rates up to 100 Gb/s using the 60 GHz band. MIMO and aggregation ...
      Subject(s) : P2P , 60 GHz , wireless , millimeter wave , IEEE 802.15.3e(TM) , point-to-point , fast setup , close proximity , IEEE 802.15.3(TM) ,

    • IEEE Standard for High Data Rate Wireless Multi-Media Networks 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The protocol and compatible interconnection of data and multimedia communication equipment via 2.4 GHz and 60 GHz radio transmissions in a Wireless Personal Area Network (WPAN) using low power and multiple modulation formats ...
      Subject(s) : mobility , wireless , ad hoc network , mm-wave , radio frequency , IEEE 802.15.3(TM) ,

    • IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: High-potential test voltages for excitation systems used with synchronous machines are established. Test voltages are established based on whether equipment is connected to the exciter power circuit or is electrically ...
      Subject(s) : test voltages , dielectric testing , IEEE 421.3(TM) , excitation systems ,

    • IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines - Redline 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: High-potential test voltages for excitation systems used with synchronous machines are established. Test voltages are established based on whether equipment is connected to the exciter power circuit or is electrically ...
      Subject(s) : excitation systems , dielectric testing , IEEE 421.3(TM) , test voltages ,

    • IEEE Standard for Green Smart Home and Residential Quarter Control Network Protocol 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Protocols are provided for measurement and control networks for home and residential quarters so that they can achieve green, smarter functions. The interactive data format between devices and systems-as well as the ...
      Subject(s) : linkage , data , management of energy , communication protocol , IEEE 1888.4(TM) , smart home , sensors , component , gateway (GW) , actuators , registry , application (APP) , remote control , scene , storage , timer , energy saving ,

    • IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Electrical and mechanical requirements for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers; single-phase and polyphase, with voltages of 601 V or higher in the highest ...
      Subject(s) : electrical requirements , distribution transformers , mechanical requirements , regulating transformers , power transformers , autotransformers , IEEE C57.12.00(TM) ,

    • IEEE Standard for Fuzzy Markup Language 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A new specification language, named Fuzzy Markup Language (FML), is presented in this standard, exploiting the benefits offered by eXtensible Markup Language (XML) specifications and related tools in order to model a fuzzy ...
      Subject(s) : hardware independence , fuzzy logic , eXtensible markup language , FML , fuzzy system , IEEE 1855(TM) , XML Schema , labeled tree , XML , interoperability , fuzzy logic controller , Fuzzy Markup Language ,

    • IEEE Standard for Ethernet--Amendment 8: Physical Layer and Management Parameters for Power over Data Lines (PoDL) of Single Balanced Twisted-Pair Ethernet 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Specifications and management parameters for the provision of power via a single twisted pair to connected Data Terminal Equipment (DTE) with IEEE 802.3 single balanced twisted-pair interfaces are added by this amendment ...
      Subject(s) : IEEE 802.3(TM) , PoDL PSE , Ethernet , 100BASE-T1 , IEEE 802.3bu(TM) , PoDL PD , Power over Data Lines , 1000BASE-T1 , PoDL ,

    • IEEE Standard for eXtensible Event Stream (XES) for Achieving Interoperability in Event Logs and Event Streams 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A grammar for a tag-based language whose aim is to provide designers of information systems with a unified and extensible methodology for capturing systems behaviors by means of event logs and event streams is defined in ...
      Subject(s) : event stream , extensions , event log , IEEE 1849(TM) , XML , system behavior ,

    • IEEE Standard for Exchanging Information Between Networks Implementing IEC 61850 and IEEE Std 1815(TM) [Distributed Network Protocol (DNP3)] 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document specifies the standard approach for mapping between IEEE Std 1815™ [Distributed Network Protocol (DNP3)] and IEC 61850 (Communications Networks and Systems for Power Utility Automation). Two primary ...
      Subject(s) : feeder , power system , network , automation , mapping , IEEE 1815(TM) , upgrade , substation , IEC 61850 , DNP3 , gateway , evolution , utility , communications ,

    • IEEE Standard for Ethernet Amendment 6: Physical Layer Specifications and Management Parameters for Ethernet Passive Optical Networks Protocol over Coax 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Physical Layer specifications and management parameters for the operation of Ethernet Passive Optical Networks (EPON) Protocol over coaxial media is defined by this amendment to IEEE Std 802.3-2015.
      Subject(s) : IEEE 802.3(TM) , EPoC , Ethernet , Physical Medium Dependent (PMD) , Multi-Point MAC Control (MPMC) , Ethernet Passive Optical Networks , orthogonal frequency division multiplexing (OFDM) , PON , point to multipoint (P2MP) , amendment , IEEE 802.3bn(TM) , Physical Coding Sublayer (PCS) , EPON , EPON Protocol over Coax , Physical Media Attachment (PMA) ,

    • IEEE Standard for Ethernet Amendment 9: Physical Layer Specifications and Management Parameters for 1000 Mb/s Operation Over Plastic Optical Fiber 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A family of three point-to-point physical layers (PHYs) for 1000 Mb/s operation over duplex plastic optical fiber (POF) and related management parameters are specified by this amendment to IEEE Std 802.3-2015.
      Subject(s) : 1000BASE-H , EEE , IEEE 802.3(TM) , Energy Efficient Ethernet , 1000BASE-RHA , plastic optical fiber , IEEE 802.3bv(TM) , BASE-H , Physical Medium Dependent sublayer , PMA , PMD , amendment , PCS , POF , 1000BASE-RHB , Physical Medium Attachment sublayer , Physical Coding Sublayer , 1000BASE-RXC ,

    • IEEE Standard for Ethernet Amendment 7: Media Access Control Parameters, Physical Layers, and Management Parameters for 2.5 Gb/s and 5 Gb/s Operation, Types 2.5GBASE-T and 5GBASE-T 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Ethernet Media Access Control (MAC) parameters, Physical Layer specifications, and management objects for the transfer of Ethernet format frames at 2.5 Gb/s and 5 Gb/s over balanced twisted-pair transmission media used in ...
      Subject(s) : IEEE 802.3(TM) , IEEE 802.3bz(TM) , Physical Medium Attachment (PMA) sublayer , Ethernet , 2.5G/5GBASE-T , amendment , XGMII , Physical Coding Sublayer (PCS) , structured cabling , Auto-Negotiation ,

    • IEEE Standard for Ethernet Amendment 4: Physical Layer Specifications and Management Parameters for 1 Gb/s Operation over a Single Twisted-Pair Copper Cable 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment to IEEE Std 802.3-2015 adds point-to-point 1 Gb/s Physical Layer (PHY) specifications and management parameters for operation on a single twisted-pair copper cable in an automotive application.
      Subject(s) : 1000BASE-T1 , Ethernet , IEEE 802(R) , IEEE 802.3(TM) , IEEE 802.3bp(TM) ,

    • IEEE Standard for Ethernet Amendment 3: Physical Layer and Management Parameters for 25 Gb/s and 40 Gb/s Operation, Types 25GBASE-T and 40GBASE-T 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment to IEEE Std 802.3-2015 specifies new Physical Coding Sublayer (PCS) interfaces and new Physical Medium Attachment (PMA) sublayer interfaces for 25 Gb/s Ethernet and 40 Gb/s Ethernet. 25GBASE-T and 40GBASE-T ...
      Subject(s) : 25 Gigabit Ethernet , IEEE 802(R) , IEEE 802.3bq(TM) , IEEE 802.3(TM) , Physical Medium Attachment (PMA) sublayer , Ethernet , 40 Gigabit Ethernet , XLGMII , 25GMII , 40GBASE-T , 25GBASE-T , Auto-Negotiation , Physical Coding Sublayer (PCS) , structured cabling ,

    • IEEE Standard for Ethernet Amendment 5: Specification and Management Parameters for Interspersing Express Traffic 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment to IEEE Std 802.3-2015 specifies additions to and appropriate modifications to add support for interspersing express traffic over a single physical link.
      Subject(s) : IEEE 802(R) , express traffic , IEEE 802.3br(TM) , IEEE 802.3(TM) , Ethernet , preemption ,

    • IEEE Standard for Ethernet Amendment 5: Specification and Management Parameters for Interspersing Express Traffic 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment to IEEE Std 802.3-2015 specifies additions to and appropriate modifications to add support for interspersing express traffic over a single physical link.
      Subject(s) : IEEE 802(R) , express traffic , IEEE 802.3br(TM) , IEEE 802.3(TM) , Ethernet , preemption ,

    • IEEE Standard for Ethernet - Amendment 2: Media Access Control Parameters, Physical Layers, and Management Parameters for 25 Gb/s Operation 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment to IEEE Std 802.3-2015 adds Physical Layer (PHY) specifications and management parameters for 25 Gb/s operation over twinaxial copper cabling (25GBASE-CR and 25GBASE-CR-S), electrical backplanes (25GBASE-KR ...
      Subject(s) : 25 Gigabit Ethernet , 25GBASE-KR-S , IEEE 802(R) , Physical Medium Dependent (PMD) sublayer , IEEE 802.3(TM) , Physical Medium Attachment (PMA) sublayer , 25GBASE-CR-S , Backplane Ethernet , Reconciliation Sublayer (RS) , Ethernet , Auto-Negotiation (AN) , Energy Efficient Ethernet (EEE) , 25GAUI , 25GBASE-SR , 25GBASE-CR , IEEE 802.3by(TM) , multimode fiber (MMF) , 25GMII , Forward Error Correction (FEC) , Physical Coding Sublayer (PCS) , 25GBASE-KR ,

    • IEEE Standard for Ethernet Amendment 1: Physical Layer Specifications and Management Parameters for 100 Mb/s Operation over a Single Balanced Twisted Pair Cable (100BASE-T1) 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The 100BASE-T1 Physical Layer (PHY) specifications and management parameters for point-to-point full duplex 100 Mb/s operation over single twisted pair balanced cabling is defined in this amendment. This specification ...
      Subject(s) : physical layer , copper , Ethernet , 100BASE-T1 , IEEE 802.3bw(TM) , MASTER-SLAVE , Medium Dependent Interface , Physical Medium Attachment , Physical Coding Sublayer ,

    • IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This corrigendum to IEEE Std 802.3-2015 clarifies which lane of the media dependent interface (MDI) of a multi-lane Physical Layer entity (PHY) is used as the timestamping reference point.
      Subject(s) : IEEE 802.3 , Ethernet , Time Synchronization , corrigendum ,