IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1601-1620 of 2832

    • IEEE C37.17 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard pertains to the requirements for direct acting current and voltage protective functions of:
      a) direct-acting overcurrent electromechanical trip devices
      b) direct-acting overcurrent electronic trip ...

    • IEEE 810 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard applies to the dimensions for all types of shaft couplings and shaft runout tolerances for hydraulic turbines and generators. Shafts and couplings included in this standard are used for both horizontal and ...

    • IEEE P1849/D03 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE 1646 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines communication delivery times of information to be exchanged within and external to substation integrated protection, control, and data acquisition systems.
      Subject(s) : automatic control , communication , communication message delivery performance measures , data acquisition , distributed processing , IED , intelligent electronic devices , SCADA , supervisory control ,

    • IEEE 26512 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This International Standard supports the interest of software users in having consistent, complete, accurate, and usable documentation. It addresses both available approaches to standardization: a) process standards, which ...
      Subject(s) : acquisition , information management , proposal , software user documentation , statement of work , supply ,

    • IEEE C57.135 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide covers the application, specification, theory of operation, and factory and field testing of singlephase and three-phase oil-immersed, phase-shifting transformers (PSTs).
      This guide is limited to matters ...
      Subject(s) : advance phase angle , dual-core design , IEEE C57.135 , main transformer , phaseshifting transformer , power transfer , retard phase angle , series transformer , single-core design , special tests ,

    • IEEE 259 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The intent of this standard is to establish a uniform method by which the thermal endurance of electrical insulation systems for dry-type specialty and general-purpose transformers can be compared. These insulation systems ...

    • IEEE 2410 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The Biometric Open Protocol Standard (BOPS) provides identity assertion, role gathering, multilevel access control, assurance, and auditing. The BOPS implementation includes software running on a client device (e.g., ...

    • IEEE C62.22 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword 
      This guide presents the suggested application methods for using metal-oxide surge arresters when applied to ac power systems. This guide was written for arresters with and without gaps. Soon to be published ...
      Subject(s) : electric power equipment , high-voltage surges , metal-oxide surge arresters , surge arresters , surge-protective devices ,

    • IEEE C57.15 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard describes electrical and mechanical requirements of liquid-immersed, single- and threephase, step-voltage regulators, not exceeding a regulation of 3000 kVA (for three-phase units) or 1000 kVA (for single-phase ...
      Subject(s) : control , design tests , position indicator , routine tests , series transformer , tap changer , Type A , Type B , voltage regulator ,

    • IEEE 62271-37-013 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This part of IEC 62271 is applicable to three-phase a.c. high-voltage generator circuitbreakers, hereafter called generator circuit-breaker, designed for indoor or outdoor installation and for operation at frequencies of ...

    • IEEE 487.4 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard presents engineering design procedures for the electrical protection of communication facilities serving electric supply locations through the use of neutralizing transformers. Other telecommunication ...

    • IEEE 1725 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard establishes criteria for design analysis for qualification, quality, and reliability of rechargeable lithium-ion (Li-Ion) and lithium-ion polymer (Li-Ion polymer) batteries for cellular telephone applications. ...
      Subject(s) : cellular telephones , IEEE 1725 , lithium ion batteries ,

    • IEEE 60780-323 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Scope and object
      This International Standard describes the basic requirements for qualifying electrical equipment important to safety and interfaces (electrical and mechanical) that are to be used in ...

    • IEEE 95 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword 
      [This introduction is not part of IEEE Std 95-2002, IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage.]
      Traditionally, the insulation ...

    • IEEE C57.12.37 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard provides a basis for electronic reporting of transformer test data on liquid immersed distribution transformers, specifically those defined in the ANSI/IEEE C57.12.2X1 standards series. This standard defines ...
      Subject(s) : distribution transformers , electronic reporting , test data ,

    • IEEE 1672 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE 1652 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE 1597.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE C37.90.3 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard specifies design tests for electrostatic discharge (ESD) tests of protective relays and relay systems. The object of the type test described in this standard is to confirm that the equipment being tested will ...
      Subject(s) : protective relay ,