IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 2041-2060 of 2832

    • IEEE C135.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1999
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard covers the requirements for threaded zinc-coated ferrous strand-eye anchor rods and nuts commonly used in overhead line construction. Metric anchor rods and nuts are not covered by this standard.
      Subject(s) : anchor rod threads , Anchor rods , bend test , nut threads , nuts , strand-eye , tensile load test , zinc-coated. ,

    • IEEE N42.32 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword
      Performance specifications, design criteria, and testing methods are provided for the evaluation of radiation detection instruments that are pocket sized and carried on the body.
      Scope
      This standard ...

    • IEEE 1210 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard applies to cable-pulling lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable-pulling lubricants are used to lower the friction on cables when they are installed ...
      Subject(s) : cable , cable covering , cable jacket , cable pulling , compatibility , compound , dielectric withstand , immersion testing , lubricants , physical properties , volume resistance measurement , wire ,

    • IEEE 1362 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide prescribes the format and contents of the concept of operations (ConOps) document. A ConOps is a user- oriented document that describes system characteristics of the to-be-delivered system from the user's ...

    • IEEE C57.98 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: To aid in the interpretation and application of the impulse testing requirements of the IEEE Standard Test Codes for Transformers.
      Purpose
      This guide is written primarily for power transformers, ...
      Subject(s) : digital recordings , IEEE C57.98 , non-linear devices , switching impulse , transfer function , transformer impulse test ,

    • IEEE 802.1AB CORR 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE C37.122.3 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide describes significant aspects of handling SF6 gas used in electric power equipment, such as gas recovery, reclamation, and recycling, in order to keep the gas permanently in a closed cycle and to avoid any ...
      Subject(s) : IEEE C37.122.3 , SF6 analysis , SF6 handling , SF6 reclaiming , SF6 recovery , SF6 safety , SF6 transportation ,

    • IEEE 3006.7 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice describes how to determine the reliability of 7×24 continuous power systems in industrial and commercial facilities. The method of reliability analysis by probability methods is described ...

    • IEEE 620 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide applies to three-phase squirrel cage induction machines, 250 hp (200 kW) and above. It is intended to be used for machines designed for specified load and application conditions. However, it may also be used for ...
      Subject(s) : machine thermal protection , rotor cage windings , stator cage windings , thermal limit curves , three-phase squirrel cage induction machines ,

    • IEEE 1185 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice provides guidance for wire and cable installation practices in generating stations and industrial facilities. This document may also be of benefit for the proper installation of wire and cable in ...
      Subject(s) : American wire gauge (AWG) , bend radius , cable , cable jamming , cable testing , cable tray , duct bank , ducts , English units , IEEE 1185 , installation , jam ratio , kcmil , metric units , outside diameter or overall diameter (OD) , pull back , pull tension , pullby , pulling bend radius , sidewall pressure , sleeve , training bend radius , trench , wire ,

    • IEEE 1076.1.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines a collection of VHDL 1076.1 packages, compatible with IEEE Std 1076.1™, along with recommendations for conforming use, in order to facilitate the interchange of simulation models of physical ...
      Subject(s) : IEEE 1076.1.1 , interchange , model interchange , model portability , modeling , multidisciplinary , multidisciplinary modeling , packages , portability , standard , standard packages , VHDL , VHDL packages , VHDL-AMS ,

    • IEEE P802.15.4K/D5 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment to IEEE Std 802.15.4-2011 provides two PHYs (DSSS and FSK) that support critical infrastructure monitoring applications. In addition, the amendment describes only those MAC modifications needed to support ...

    • IEEE 828 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard establishes the minimum requirements for Configuration Management (CM) in Systems and Software Engineering, without restriction to any form, class, or type.
      Purpose
      This standard ...
      Subject(s) : change control , configuration accounting , configuration audit , configuration item , configuration management , IEEE 828 , release engineering , software builds , software configuration management , system ,

    • IEEE 11073-10101 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword 
      ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out ...

    • IEEE 726 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: (This Foreword is not a part of ANSI/IEEE Std 726-1982, IEEE Standard Real-Time BASIC for CAMAC.)

    • IEEE 11073-10415 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth weighing scale devices and compute engines ...
      Subject(s) : medical device communication , personal health devices , weighing scale ,

    • IEEE 1222 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard covers the construction, mechanical, electrical, and optical performance, installation guidelines, acceptance criteria, test requirements, environmental considerations, and accessories for an alldielectric, ...
      Subject(s) : ADSS , all-dielectric self-supporting fiber optic cable , IEEE 1222 , overhead utility ,

    • IEEE 1025 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide presents various approaches of good practice that will improve the ability to assemble and erect self-supporting and guyed concrete pole structures. This guide covers construction aspects after foundation ...

    • IEEE 1620 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword
      This standard covers recommended methods and standardized reporting practices for electrical characterization of organic transistors. Due to the nature of organic transistors, significant measurement errors can ...

    • IEEE 1547.3 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document provides guidelines for monitoring, information exchange, and control of distributed resources (DR) interconnected with electric power systems (EPSs).
      Purpose
      This document provides ...
      Subject(s) : communications , control , data acquisition , diesel generators , dispersed generation , distributed energy resources , distributed generation , distributed power , distributed resources , distribution system , electric power system , electrical network , energy management , energy storage , federal , fuel cells , grid , IED , information exchange , intelligent electronic devices , interconnection requirements and specifications , meter , microturbines , monitoring , national , photovoltaic power systems , public utility commission , regional , regulations , rulemaking , SCADA , standards , state , substations , supervisory , telemetry , utility grid ,