درباره ما
IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions
Now showing items 2081-2100 of 2832
-
IEEE 1484.1
Abstract: This standard specifies a high-level architecture for information technology-supported learning, education, and training systems that describes the high-level system design and the components of these systems. This standard ... -
IEEE 181
Abstract: This standard defines terms pertaining to transitions, pulses, and related waveforms and defines procedures for estimating their parameters.
Purpose
The purpose of the standard is to unambiguously ...Subject(s) : aberration , algorithms , compound waveform , histogram , IEEE 181 , levels , pulse , pulse amplitude , pulse definitions , pulse measurement , state boundaries , state levels , states , transients , transition duration , transitions , waveform analysis , waveform definitions , waveform parameters , waveform terms , waveforms , -
IEEE 149
Abstract: Foreword
This document is a major revision of IEEE Std 149-1965 which it supersedes. It represents the second revision of the standard since the original issuance in 1948 of 48IRE2S2, Standards on ... -
IEEE C95.7
Abstract: This recommended practice presents guidelines and procedures that can form the basis of a radio frequency exposure safety program1 (RFSP) that provides guidance for controlling hazards associated with radio ...Subject(s) : access restriction , electromagnetic exposure , electromagnetic fields (EMF) , exposure assessment , exposure categorization , non-ionizing radiation (NIR) , personal monitors , personal protective equipment (PPE) , radio frequency (RF) , radio frequency safety program (RFSP) , radio-frequency exposure , RF awareness training , RF protection , RF safety committee , RF safety officer , signage , -
IEEE 323
Abstract: Forward
(This introduction is not part of IEEE Std 323-2003, IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations.)
IEEE Std 323-2003, a revision of IEEE Std 323-1983, is the result ...Subject(s) : age conditioning , aging , condition monitoring , design basis events , equipment qualification , harsh environment , margin , mild environment , qualification methods , qualified life , radiation , safety related function , significant aging mechanism , test plan , test sequence , type testing , -
IEEE C37.13.1A
Abstract: Introduction
This introduction is not part of IEEE Std C37.13.1a-2010, IEEE Standard for Definite-Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear̵ ...Subject(s) : definite-purpose switching device , low-voltage ac power circuit breaker , -
IEEE 449
Abstract: This standard pertains to ferroresonant voltage regulators that operate at relatively constant frequencies and provide substantially constant output voltages in spite of relatively large changes of input voltage. It also ... -
IEEE 1278.2
Abstract: Foreword
Communication services to support information exchange between simulation applications participating in the Distributed Interactive Simulation (DIS) environment are defined. These communication services ...Subject(s) : communication service , Distributed Interactive Simulation , multicast , protocol data units (PDUs) , simulation network , -
IEEE 67
Abstract: This guide covers general recommendations for the operation, loading, and maintenance of turbine-driven synchronous generators, termed turbine generators, having cylindrical rotors. It does not apply to generators having ...Subject(s) : cylindrical rotors , operation and maintenance of turbine generators , reactive capability , rotor windings , stator windings , turbine-driven synchronous generators , -
IEEE C62.31
Abstract: This standard applies to gas-tube surge-protective device components for application on systems with voltages less than or equal to 1000 V rms or 1200 V dc. These protective devices are designed to limit voltage surges on ...Subject(s) : ac discharge current , arc current , arc voltage , backup air-gap device , breakdown , breakdown voltage , capacitance , current , dc holdover voltage , dc sparkover voltage , discharge current , discharge voltage , follow current , gas-tube surge protector , glow current , glow voltage , glow-to-arc transition current , impulse sparkover voltage , insulation resistance , longitudinal mode voltage , short circuit , transfer time , transition time , transverse mode voltage , wave shape , -
IEEE 1617
Abstract: This guide is primarily concerned with outdoor ac substations, either conventional or gas-insulated. Distribution, transmission, and generating plant substations are included. With proper caution, the methods described ... -
IEEE 389
Abstract: This recommended practice presents a number of tests for use in determining the significant parameters and performance characteristics of electronics transformers and inductors. These tests are designed primarily for ... -
IEEE 11073-10407
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth blood pressure monitor devices and compute ...Subject(s) : blood pressure monitor , medical device communication , personal health devices , -
IEEE 1680.3
Abstract: This standard defines environmental performance for televisions, television combination units, and component television units, relating to reduction or elimination of environmentally sensitive materials, materials selection, ... -
IEEE 1453
Abstract: This recommended practice provides background on light flicker caused by fluctuations in power demands of variable loads. A flicker measurement method is presented using a meter that is completely described in IEC 61000-4-15. ... -
IEEE 14764
Abstract: This standard describes an iterative process for managing and executing software maintenance activities. Use of this standard is not restricted by size, complexity, criticality, or application of the software product. This ...Subject(s) : life cycle , maintenance , software , software maintenance , -
IEEE 62659
Abstract: This International Standard provides a framework for introducing nanoelectronics into large scale, high volume production in semiconductor manufacturing facilities through the incorporation of nanomaterials (e.g. carbon ... -
IEEE C62.23
Abstract: The purpose of this clause is to guide the reader in understanding the nature of surges that can enter the power plant premises via transmission and distribution lines and to indicate methods to reduce their magnitudes. ...Subject(s) : electric generating plants , electric power , electric utilities , generating plants , power plants , surge protection , -
IEEE 1619.2
Abstract: This standard specifies an architecture for encryption of data in random access storage devices, oriented toward applications that benefit from wide encryption-block sizes of 512 bytes and above.
Purpose ...Subject(s) : data-at-rest security , encryption , encryption with associated data (EAD) , encrypt-mixencrypt-v2 mode of operation (EME2) , extended codebook mode of operation (XCB) , IEEE 1619.2 , security , storage ,