IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 2421-2440 of 2832

    • IEEE 1621 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard covers the user interface for the power status control of electronic devices that ordinary people commonly interact with in their work and home lives, including, but not limited to, office equipment and ...
      Subject(s) : electronic device , power control , power indicator , power state , sleep state , user interface ,

    • IEEE 485 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Methods for defining the dc load and for sizing a lead-acid battery to supply that load for stationary battery applications in full float operations are described. Some factors relating to cell selection are provided for ...
      Subject(s) : batteries , battery duty cycle , cell selection , dc load , full-float operation , IEEE 485 , lead-acid , rated capacity , sizing , stationary applications , valve-regulated lead-acid (VRLA) cell , vented battery ,

    • IEEE C57.13.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The scope of this guide is to describe field test methods that assure current transformers (CTs) are connected properly, are of marked ratio and polarity, and are in a condition to perform as designed both initially and ...
      Subject(s) : relaying ,

    • IEEE N42.6 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1991
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword
      (This Foreword is not a part of ANSI N42.6-1980, American National Standard Interrelationship of Quartz-Fiber Electrometer Type Exposure Meters and Companion Exposure Meter Chargers.)
      The first version of ...

    • IEEE 1580 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice contains the requirements for single or multiconductor cables, with or without metal armor and/or jacket, and rated 300 V to 35 kV (RMS phase-to-phase), intended to be installed aboard marine ...
      Subject(s) : marine cable , offshore facilities , platforms , shipboard ,

    • IEEE N42.47 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard applies to security screening systems that utilize x-ray or gamma radiation and are used to inspect people who are not inside vehicles, containers, or enclosures. Specifically, this standard applies to systems ...
      Subject(s) : body scanner , gamma-ray , imaging performance , materials detection , minimum requirements , penetration , personnel scanner , security screening , spatial resolution , wire detection , x-ray ,

    • IEEE 11073-10471 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE 1101.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Basic dimensions of subracks
      This standard covers the basic dimensions of a range of modular subracks conforming to IEC 60297-3 (1984-01) and IEC 60297-4 (1995-03) for mounting in equipment according ...

    • IEEE 1900.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice will provide technical guidelines for analyzing the potential for coexistence or in contrast interference between radio systems operating in the same frequency band or between different frequency ...
      Subject(s) : spectrum access ,

    • IEEE 813 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Forward
      (This Foreword is not a part of ANSI/IEEE Std 813-1988, IEEE Specification Format Guide and Test Procedure for Two-Degree-of- Freedom Dynamically Tuned Gyros.)
      This guide was prepared by the Gyro and ...

    • IEEE 1585 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2002
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword
      Several utilities are experimenting with electronic devices to reduce voltage fluctuations. Industrial customers with sensitive loads are installing different electronic devices to mitigate voltage fluctuations. ...

    • IEEE 802.3 ERTA 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE 2003.1B 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2000
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines the test method specifications for measuring conformance of an implementation to POSIX.1b {3}2). Assertions are the primary test method specification for measuring conformance to POSIX.1b ...

    • IEEE 1310 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This procedure is intended for form-wound bars/coils for rotating machines rated 10 kV or more at 50 Hz or 60 Hz that are subjected to many transitions from no-load to full-load current during normal operations, and where ...

    • IEEE 666 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword 
      (This foreword is not a part of IEEE Std 666-1991, IEEE Design Guide for Electric Power Service Systems for Generating Stations.)
      This document is primarily tutorial in nature as it is intended to ...

    • IEEE C37.13A 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Change item a) as follows:
      a) Stationary or drawout type of two-, three-, or four-pole construction with one or more rated maximum voltages of 1058 V, 730 V, 635 V (600 V for units incorporating ...

    • IEEE 1434 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide discusses both on-line and off-line partial discharge (PD) measurements on complate windings of any type, as well as measurements on individual form wound coils and bars. Measurements selected from those that ...
      Subject(s) : ELECTRICAL INSULATION , FORM-WOUND BARS , FORM-WOUND COILS , PARTIAL DISCHARGE , ROTATING MACHINE WINDINGS ,

    • IEEE 1635 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide discusses the ventilation and thermal management of stationary battery systems as applied to the following:
      — Vented (flooded) lead-acid (VLA)
      — Valve-regulated lead-acid (VRLA)
      — ...

    • IEEE 1140 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard provides procedures for the measurement of electric and magnetic fields in close proximity to video display terminals (VDTs) in the frequency range of 5 Hz to 400 kHz. This standard adapts existing international ...
      Subject(s) : electric field , magnetic field , video display terminal (VDT) ,

    • IEEE 242 ERTA 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: FOREWORD
      IEEE Std 242-2001, the IEEE Buff Book™ , has been extensively revised and updated since it was first published in 1975. The IEEE Buff Book deals with the proper selection, application, ...