Show simple item record

MICROCIRCUIT, LINEAR, FET BUFFER, HYBRID

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:43:05Z
date available2017-09-04T16:43:05Z
date copyright09/04/1990
date issued1990
identifier otherVTIVDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/106352
description abstractThis drawing describes device requirements for class H hybrid microcircuits to be processed in accordance with MIL-H-38534.
The complete part number shall be as shown in the following example: CHART
The device type shall identify the circuit function as follows:
         Device type       Generic number            Circuit function                01                EL2004                   FET buffer


The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows:
         Outline letter                               Case outline                  X                 (See figure 1, TO-8 (12-lead can))                 Y                 C-6 (52-lead, .761" × .761" × .120"), square leadless chip carrier


       Supply voltage (VS) - - - - - - - - - - - - - - - - - - -   ±20 V dc        Input voltage (VIN) - - - - - - - - - - - - - - - - - - -   ±20 V dc        Power dissipation (PD):           Case X - - - - - - - - - - - - - - - - - - - - - - - -   1.5 W           Case Y - - - - - - - - - - - - - - - - - - - - - - - -   2.5 W        Peak output current (Iop) - - - - - - - - - - - - - - - -   ±250 mA        Storage temperature range - - - - - - - - - - - - - - - -   −65°C to +150°C        Lead temperature (soldering, 10 seconds)  - - - - - - - -   300°C        Thermal resistance, junction-to-case (θJC):           Case X - - - - - - - - - - - - - - - - - - - - - - - -   31°C/W           Case Y - - - - - - - - - - - - - - - - - - - - - - - -   25°C/W        Thermal resistance, junction-to-ambient (θJA):           Case X - - - - - - - - - - - - - - - - - - - - - - - -   100°C/W           Case Y - - - - - - - - - - - - - - - - - - - - - - - -   60°C/W        Operating junction temperature (TJ) - - - - - - - - - - -   +175°C


       Positive supply voltage (V+)  - - - - - - - - - - - - - -   +15 V dc        Negative supply voltage (V−)  - - - - - - - - - - - - - -   −15 V dc        Ambient operating temperature range (TA)  - - - - - - - -   −55°C to +125°C


Unless otherwise specified, the following specifications, standard, and bulletin of the issue listed in that issue of the Department of Defense Index of Specifications and Standards specified in the solicitation, form a part of this drawing to the extent specified herein.
    SPECIFICATIONS        MILITARY          MIL-M-38510  -  Microcircuits, General Specification for.         MIL-H-38534  -  Hybrid Microcircuits, General Specification for.      STANDARD        MILITARY          MIL-STD-883  -  Test Methods and Procedures for Microelectronics.      BULLETIN        MILITARY          MIL-BUL-103  -  List of Standardized Military Drawings (SMD's).


(Copies of the specifications, standard, and bulletin required by manufacturers in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting activity.)
In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing shall take precedence.
Intended Use: Microcircuits conforming to this drawing are intended for original equipment design applications and logistic support of existing equipment.
languageEnglish
titleSMD-5962-89659num
titleMICROCIRCUIT, LINEAR, FET BUFFER, HYBRIDen
typestandard
page12
statusActive
treeDLA - CC - DLA Land and Maritime:;1990
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record