Show simple item record

MICROCIRCUIT, MEMORY, DIGITAL, CMOS, UV ERASABLE PROGRAMMABLE LOGIC DEVICE, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:44:51Z
date available2017-09-04T16:44:51Z
date copyright01/21/1994
date issued1994
identifier otherVXZXDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/108165
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes Q and M) and space application (device class V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN.
The complete PIN shall be as shown in the following example: CHART
Device class M RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
    Device type        Generic number  1/          Circuit function         Propagation delay          01                                        24-Macrocell EPLD              35 ns         02                                        24-Macrocell EPLD              25 ns         03                                        24-Macrocell EPLD              20 ns


The device class designator shall be a single letter identifying the product assurance level as follows:
     Device class                               Device requirements documentation             M                         Vendor self-certification to the requirements for non-JAN class B                                      microcircuits in accordance with 1.2.1 of MIL-STD-883          Q or V                       Certification and qualification to MIL-I-38535


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
        Outline letter         Descriptive designator         Terminals             Package style                 Q                 GDIP1-T40, CDIP2-T40            40              Dual-in-line package  2/


The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein) for class M or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
     Supply voltage range (VCC) - - - - - - - - - - -     −2.0 V dc to +7.0 V dc      Programming supply voltage range (VPP) - - - - -     −2.0 V dc to +13.5 V dc 4/      DC input voltage range - - - - - - - - - - - - -     −0.5 V dc to VCC + 0.5 V dc 4/      Maximum power dissipation  - - - - - - - - - - -      1.0 W 5/      Lead temperature (soldering, 10 seconds) - - - -     +275°C      Thermal resistance, junction-to-case (θJC):        Case outline Q   - - - - - - - - - - - - - - -     See MIL-STD-1835      Junction temperature (TJ)  - - - - - - - - - - -     +150°C      Storage temperature range  - - - - - - - - - - -     −65°C to +150°C      Temperature under bias range - - - - - - - - - -     −55°C to +125°C  6/      Endurance  - - - - - - - - - - - - - - - - - - -      25 erase/write cycles (minimum)      Data retention - - - - - - - - - - - - - - - - -      10 years (minimum)


     Supply voltage range (VCC) - - - - - - - - - - - -     +4.5 V dc to +5.5 V dc      Ground voltage (GND) - - - - - - - - - - - - - - -      0 V dc      Input high voltage (VIH) - - - - - - - - - - - - -      2.0 V dc minimum      Input low voltage (VIL)  - - - - - - - - - - - - -      0.8 V dc maximum      Case operating temperature range (TC)  - - - - - -     −55°C to +125°C 6/      Input rise time (tR) - - - - - - - - - - - - - - -      500 ns maximum      Input fall time (tF) - - - - - - - - - - - - - - -      500 ns maximum


      Fault coverage measurement of manufacturing         logic tests (MIL-STD-883, test method 5012)- - - - - -     XX percent  7/


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-90799num
titleMICROCIRCUIT, MEMORY, DIGITAL, CMOS, UV ERASABLE PROGRAMMABLE LOGIC DEVICE, MONOLITHIC SILICONen
typestandard
page21
statusRevised
treeDLA - CC - DLA Land and Maritime:;1994
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record