Show simple item record

RELAYS, HYBRID, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:46:36Z
date available2017-09-04T16:46:36Z
date copyright09/10/2012
date issued2012
identifier otherWCWIZEAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/109907
description abstractThis specification establishes the general requirements for relays that use a combination of solid state circuit input elements functioning with an electro-mechanical relay that performs the switching functions associated with control system applications (see 6.1). These relays are designed to operate in low and medium power switching circuits with contact ratings up to 1 ampere alternating current (ac) or direct current (dc). The failure rate level is established at a confidence level of 90 percent for qualification and 60 percent for maintenance of qualification based on 100,000 cycles at +125°C under rated load conditions specified herein. Excludes time delay relays. CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. CAUTION: Pick-up, hold, and dropout voltages are for test purposes only and are not to be used as design criteria. For additional application and caution information, see 6.1.Intended Use: Relays conforming to this specification are intended for use in electronic and communication equipment. Their principal areas of application are for aircraft, missiles, spacecraft and ground-support electronic and communication equipment.
languageEnglish
titleMIL-PRF-28776Enum
titleRELAYS, HYBRID, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FORen
typestandard
page46
statusActive
treeDLA - CC - DLA Land and Maritime:;2012
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record