Browsing TAPPI - TAPPI by Title

Now showing items 1-20 of 533

      • TAPPI T 1006 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2010
        Organization : TAPPI - TAPPI
        Abstract: The purpose of this standard practice is to list existing TAPPI test methods which provide procedures for sampling and lot acceptance, stiffness, tear resistance, and thickness, and to suggest modifications to these methods ...
        Subject(s) : Bend strength , Fiber mats , Glass fibers , Sampling , Stiffness , Tear strength , Thickness ,

      • TAPPI T 1007 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2010
        Organization : TAPPI - TAPPI
        Abstract: This practice covers the location from which samples are taken from a sheet of fiber glass mat used as a sample test unit for physical property determination.
        Subject(s) : Fiber mats , Glass fibers , Sampling ,

      • TAPPI T 1008 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2010
        Organization : TAPPI - TAPPI
        Abstract: This practice defines the test conditions for testing fiber glass mats.
        Subject(s) : Controlled atmospheres , Fiber mats , Glass fibers , Humidity control , Temperature control , Testing ,

      • TAPPI T 1009 OM 

        Type: standard
        Source: TAPPI - TAPPI:;2010
        Organization : TAPPI - TAPPI
        Abstract: This method covers the determination of the tensile strength and elongation at break of fiber glass mats.
        Subject(s) : Elongation , Fiber mats , Glass fibers , Stretch , Tensile strength ,

      • TAPPI T 1011 OM 

        Type: standard
        Source: TAPPI - TAPPI:;2011
        Organization : TAPPI - TAPPI
        Abstract: This method covers the determination of the basis weight of fiber glass mat. The basis weight includes the fiber, binder and other materials incorporated into the finished web. Weight is reported as pounds per 100 square ...
        Subject(s) : Basis weight , Fiber glass mats ,

      • TAPPI T 1012 OM 

        Type: standard
        Source: TAPPI - TAPPI:;2010
        Organization : TAPPI - TAPPI
        Abstract: This method covers the determination of the moisture content of fiber glass mat.
        Subject(s) : Fiber glass mats , Moisture content ,

      • TAPPI T 1013 OM 

        Type: standard
        Source: TAPPI - TAPPI:;2010
        Organization : TAPPI - TAPPI
        Abstract: This method covers the determination of the percent loss on ignition of fiber glass mats. This ignition loss can be considered to be the binder content.
        Subject(s) : Fiber glass mats , Loss on ignition ,

      • TAPPI T 1014 OM 

        Type: standard
        Source: TAPPI - TAPPI:;2010
        Organization : TAPPI - TAPPI
        Abstract: This test method covers the determination of the moisture sensitivity of fiber glass mat binder systems.
        Subject(s) : Fiber glass mats , Moisture sensitivity , Sensitivity ,

      • TAPPI T 1015 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2010
        Organization : TAPPI - TAPPI
        Abstract: This method is a description of fiber glass mat attributes that define visual uniformity in the finished mat product.
        Subject(s) : Defects , Fiber glass mats , Formation , Uniformity , Vision , Visual defects ,

      • TAPPI T 1205 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2009
        Organization : TAPPI - TAPPI

      • TAPPI T 1210 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2012
        Organization : TAPPI - TAPPI
        Abstract: This Standard Practice deals with the application of the International System of units (abbreviated "SI" or "SI metric units") within the field of pulp, paper, and paperboard. TAPPI regulations require the use of the SI ...

      • TAPPI T 1211 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2011
        Organization : TAPPI - TAPPI
        Abstract: This standard practice establishes the "self certification" procedures for an organization to nominate itself, and be accepted, as a TAPPI calibration laboratory for inclusion in the listing of such sources within the ...
        Subject(s) : Calibration , Instrument characteristics , Laboratories , Measuring instruments , Standard practice , Standards ,

      • TAPPI T 1212 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2012
        Organization : TAPPI - TAPPI
        Abstract: This standard practice covers the significance and application of both instrumental and visual light sources for evaluating papers and related materials including those containing fluorescent whitening agents. The information ...

      • TAPPI T 1214 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2012
        Organization : TAPPI - TAPPI
        Abstract: The following interrelationships will be found particularly useful in predicting the effect upon opacity when a change occurs in either the basis weight or the reflectivity of a sheet of paper. These interrelationships can ...

      • TAPPI T 1215 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2012
        Organization : TAPPI - TAPPI
        Abstract: This standard practice provides a general introduction to the use of color differences and a list of the most widely used equations to obtain them. Color differences can be used 1) as a guide to establishing color tolerances ...

      • TAPPI T 1216 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2007
        Organization : TAPPI - TAPPI
        Abstract: This Standard Practice deals only with simplified color indices applicable specifically to white colors. There are approximately 5000 distinguishable white colors. As with any other color, three numbers are necessary for ...

      • TAPPI T 1217 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2012
        Organization : TAPPI - TAPPI
        Abstract: This standard practice describes a test for linearity required by the following TAPPI optical methods:
        T 425 Opacity
        T 452, 525, 534, 646 Brightness
        T 480, 653 Gloss
        T 524, 527 Color
        T 560, 562 Whiteness ...

      • TAPPI T 1219 SP 

        Type: standard
        Source: TAPPI - TAPPI:;2012
        Organization : TAPPI - TAPPI
        Abstract: Procedures for handling and storing samples are generally based on the premise that heat and light are the two primary factors affecting change. This standard practice lists several practices that have been found to be ...

      • TAPPI T 1500 GL 

        Type: standard
        Source: TAPPI - TAPPI:;2012
        Organization : TAPPI - TAPPI
        Abstract: This glossary defines terms used in the pulp and paper industry relating to both visual and instrumental evaluations of appearance. This technical terminology includes such optical assessments such as brightness, whiteness, ...

      • TAPPI T 1501 SG 

        Type: standard
        Source: TAPPI - TAPPI:;2011
        Organization : TAPPI - TAPPI
        Abstract: The purpose of this standard is to provide guidelines for skills and knowledge needed by a paper machine tender, often referred to as the paper machine first hand. The standard will be useful as a measure of the capabilities ...
        Subject(s) : Education , Machine operation , Machine tenders , Paper machines , Personnel , Training ,