درباره ما
MIL-C-17588E
CIRCUIT BREAKERS (AUTOMATIC - ALB-1) AND SWITCH, TOGGLE (CIRCUIT BREAKER, NON-AUTOMATIC - NLB-1) AIR, INSULATED HOUSING, 125 VOLTS AND BELOW, A.C. AND D.C., (NAVAL SHIPBOARD USE)
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T15:12:47Z | |
| date available | 2017-09-04T15:12:47Z | |
| date copyright | 31377 | |
| date issued | 1985 | |
| identifier other | LYJKDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/11340 | |
| description abstract | This specification covers circuit breakers with housing of insulating material for Naval shipboard use. Circuit breakers (see 6.4.2) shall be of the types (see 6.4.28), current ratings, voltages, trip characteristics, and interrupting capacities with mounting bases as specified in 1.2.1 through 1.2.2. A circuit breaker rating shall be for 60 hertz (Hz), 400 Hz alternating current (ac) and direct current (dc) applications. The type designation shall be in the following form, as specified (see 6.2.1): The type is identified by a three letter symbol and a number as shown in table I. The first letter identifies the operation and trip characteristic: A denotes automatic trip at currents in excess of the specified rated values (see tables II, III, and IV). N denotes the nonautomatic trip (cross-line interrupting switch). The letters LB denote low voltage circuit breakers. 1 denotes the circuit breaker has one pole. TABLE I. Type designation. Type Operation Maximum trip element (or switch) rating amperes (frame size (see 6.4.5)) ---------------------------------------------------------- ALB-1 Automatic 50 NLB-1 Nonautomatic 50 The current rating is identified by a number followed by the letter A, which identifies the maximum continuous current rating (see 6.4.4) of the device in amperes. The symbol 5A, for instance, identifies a 5 ampere (ac or dc) continuous current rating. Intended Use: The principal application of circuit breakers covered by this specification is to provide overcurrent protection, high speed clearing of faults, and as circuit disconnect switches in 125 Vac (60 or 400 Hz) or 125 Vdc circuits where the available short circuit current is less than the specified circuit breaker interrupting capacity (see table II). | |
| language | English | |
| title | MIL-C-17588E | num |
| title | CIRCUIT BREAKERS (AUTOMATIC - ALB-1) AND SWITCH, TOGGLE (CIRCUIT BREAKER, NON-AUTOMATIC - NLB-1) AIR, INSULATED HOUSING, 125 VOLTS AND BELOW, A.C. AND D.C., (NAVAL SHIPBOARD USE) | en |
| type | standard | |
| page | 31 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1985 | |
| contenttype | fulltext |
