Show simple item record

MICROCIRCUIT, DIGITAL, HCMOS MULTIFUNCTION PERIPHERAL, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:50:01Z
date available2017-09-04T16:50:01Z
date copyright34267
date issued1993
identifier otherWMWXDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/113634
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
        Device type     Generic number         Frequency                  Circuit function               01           68C901B-4            4.0 MHz            HCMOS multifunction peripheral              02           68C901B-5            5.0 MHz            HCMOS multifunction peripheral              03           68C901B-8            8.0 MHz            HCMOS multifunction peripheral


The device class designator shall be a single letter identifying the product assurance level as follows:
   Device class                     Device requirements documentation          M             Vendor self-certification to the requirements for non-JAN class B                       microcircuits in accordance with 1.2.1 of MIL-STD-883        B or S          Certification and qualification to MIL-M-38510        Q or V          Certification and qualification to MIL-I-38535


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
   Outline letter              Descriptive designator         Terminals        Package style           x                   GDIP1-T48 or CDIP2-T48            48            Dual-in-Line          y                   COCC1-N52                         52            Leadless chip carrier          z                   CMGA15-P68                        68            Pin grid array  1/          u                   See figure 1                      52            Leaded chip carrier


The Lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish Letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
    Supply voltage range, referenced to ground (VCC) . . . . . . . .     −0.3 V dc to +7.0 V dc     Input voltage  . . . . . . . . . . . . . . . . . . . . . . . . .     −0.3 V dc to +7.0 V dc     Storage temperature range  . . . . . . . . . . . . . . . . . . .     −55°C to 150°C     Maximum power dissipation (PD) . . . . . . . . . . . . . . . . .     55 mW     Lead temperature (soldering, 10 seconds) . . . . . . . . . . . .     +270°C     Maximum operating junction temperature (TJ)  . . . . . . . . . .     +170°C     Thermal resistance, junction-to-case (ΘJC):       Cases X, Y and Z . . . . . . . . . . . . . . . . . . . . . . .     See MIL-STD-1835       Case U . . . . . . . . . . . . . . . . . . . . . . . . . . . .     10°C/W


    Supply voltage range (VCC) . . . . . . . . . . . . . . .     4.5 V dc minimum to 5.5 V dc maximum     High level input voltage range (VIH)   . . . . . . . . .     2.0 V dc to VCC     Low level input voltage range (VIL)  . . . . . . . . . .     −0.3 V dc to 0.8 V dc     Frequency of operation:        Device type 01  . . . . . . . . . . . . . . . . . . .     1.0 MHZ to 4.0 MHZ        Device type 02  . . . . . . . . . . . . . . . . . . .     1.0 MHZ to 5.0 MHZ        Device type 03  . . . . . . . . . . . . . . . . . . .     1.0 MHz to 8.0 MHZ     Case operating temperature range (TC)  . . . . . . . . .     −55°C to +125°C


          Fault coverage measurement of manufacturing             logic tests (MIL-STD-883, test method 5012) . . . . .    XX percent 2/


Intended Use: microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-90864 REV Anum
titleMICROCIRCUIT, DIGITAL, HCMOS MULTIFUNCTION PERIPHERAL, MONOLITHIC SILICONen
typestandard
page31
statusActive
treeDLA - CC - DLA Land and Maritime:;1993
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record