MIL-I-24178

INSULATION TAPE, ELECTRICAL, SEMI-CURED THERMOSETTING RESIN TREATED GLASS, ARMATURE BANDING, NAVAL SHIPBOARD

contributor author	NAVY - SH - Naval Sea Systems Command (Ship Systems)
date accessioned	2017-09-04T16:50:40Z
date available	2017-09-04T16:50:40Z
date copyright	03/25/1966
date issued	1966
identifier other	WOQLDAAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/114293
description abstract	This specification covers semi-cured thermosetting resin treated, unidirectional glass electrical insulating tape intended for banding armatures of rotating electrical machines for shipboard use. Other applications may be banding of wound rotor coils, securing stator coils, surge rings, commutator string bands. Glass banding tape shall be of the following types, as specified (see 6.2): Type B - General purpose, 130°C. for continuous operation. Type H - High temperature, 180°C. for continuous operation. Intended Use: This tape is intended for banding armatures and other items of electrical equipment where a strong, non-metallic restraining material is needed to prevent coil movement under centrifugal forces and electrical stresses. Instructions for applying these materials to armatures and other items of electrical equipment is contained in the appendix to this specification.
language	English
title	MIL-I-24178	num
title	INSULATION TAPE, ELECTRICAL, SEMI-CURED THERMOSETTING RESIN TREATED GLASS, ARMATURE BANDING, NAVAL SHIPBOARD	en
type	standard
page	14
status	Active
tree	NAVY - SH - Naval Sea Systems Command (Ship Systems):;1966
contenttype	fulltext