Show simple item record

MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, 1-OF-16 DECODER/DEMULTIPLEXER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:52:01Z
date available2017-09-04T16:52:01Z
date copyright03/14/1994
date issued1994
identifier otherWSFYDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/115638
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes Q, and M) and space application (device class V), and a choice of case outlines and Lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes M RHA marked devices shall meet the MIL-I-38535 appendix A specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
            Device type               Generic number                    Circuit function                  01                      54F154                    1-of-16 decoder/demultiplexer


The device class designator shall be a single letter identifying the product assurance level as follows:
          Device class                        Device requirements documentation                 N                Vendor self-certification to the requirements for non-JAN class B                                 microcircuits in accordance with 1.2.1 of MIL-STD-883               Q or V             Certification and qualification to MIL-I-38535


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
    Outline letter       Descriptive designator       Terminals        Package style            K                GDFP2-F24 or CDFP3-F24         24          flat package           L                GDIP3-T24 or MIP4-T24          24          dual-in-line package           3                     CQCC1-N28                 28          square chip carrier package


The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein) for class N or MIL-1-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
Supply voltage range (VCC) - - - - - - - - - - - - - - - - -   −0.5 V dc to +7.0 V dc Input voltage range (VIN) - - - - - - - - - - - - - - - - -    −0.5 V dc to +7.0 V dc Input current range (IIN) - - - - - - - - - - - - - - - - -    −30 mA to 5.0 mA Voltage applied to output (VOUT) - - - - - - - - - - - - - -   −0.5 V to +VCC Current applied to output (IOUT) - - - - - - - - - - - - -     40 mA Storage temperature range - - - - - - - - - - - - - - - - -    −65°C to +150°C Lead temperature (soldering, 10 seconds) - - - - - - - - - -   +300°C Junction temperature TJ - - - - - - - - - - - - - - - - - -    +175°C Maximum power dissipation (PD): 2/ - - - - - - - - - - - - -   220 mW Thermal resistance, junction-to-case (ΘJC) - - - - - - - - -   See MIL-STD-1835


Supply voltage range (VCC) - - - - - - - - - - - - - - - - -   4.5 V dc to 5.5 V dc Maximum input clamp current, (IIK) - - - - - - - - - - - - -   −18 mA Maximum high level output current, (IOH) - - - - - - - - - -   −1 μA Maximum low level output current, (IOL) - - - - - - - - - -    20 mA Input rise and fall times, (tr, tf) - - - - - - - - - - - -    2.5 ns High level input voltage, (VIH) - - - - - - - - - - - - - -    2.0 V Low level input voltage (VIL) - - - - - - - - - - - - - - -    +0.8 V Case operating temperature range (TC) - - - - - - - - - - -    −55°C to +125°C


       Fault coverage measurement of manufacturing          logic tests (MIL-STD-883, test method 5012) - - - - - - - - - - - -   3/ percent


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-94554num
titleMICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, 1-OF-16 DECODER/DEMULTIPLEXER, MONOLITHIC SILICONen
typestandard
page16
statusActive
treeDLA - CC - DLA Land and Maritime:;1994
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record