درباره ما
ANS - American Nuclear Society: Recent submissions
Now showing items 41-60 of 87
-
ANS 6.4.2
Abstract: This standard sets forth physical and nuclear properties that shall be reported by the supplier as appropriate for a particular application in order to form the basis for the selection of radiation shielding materials. -
ANS 2.27
Abstract: This standard provides criteria and guidelines for conducting geological, seismological, and geotechnical investigations needed to provide information to support the following:
(1)Seismic source characterization input ... -
ANS 51.10
Abstract: This standard sets forth the nuclear safety-related functional requirements, performance requirements, design criteria, design requirements for testing and maintaince, and interfaces for the nuclear safety-related portion ... -
ANS 15.4
Abstract: This standard provides criteria for the selection and training of research reactor operating personnel. It addresses their qualifications, training, initial licensing, requalification, and relicensing.
This standard ... -
ANS 3.5
Abstract: This standard establishes the functional requirements for full-scope nuclear power plant control room simulators for use in operator training and examination.1) The standard also establishes criteria for the ... -
ANS 6.6.1
Abstract: This standard defines calculational requirements and discusses measurement techniques for estimates of dose rates near light water reactor (LWR) nuclear power plants due to direct and scattered gamma-rays from contained ... -
ANS 55.1
Abstract: This standard sets forth the design, construction, and performance requirements for a solid radioactive waste processing system for light-water-cooled reactor plants. For the purposes of this standard, the solid radioactive ... -
ANS 8.23
Abstract: This standard provides criteria for minimizing risks to personnel during emergency response to a nuclear criticality accident outside reactors. This standard applies to those facilities for which a criticality accident ... -
ANS 8.21
Abstract: This standard provides guidance for the use of fixed neutron absorbers as an integral part of nuclear facilities and fissionable material process equipment outside reactors, where such absorbers provide criticality safety control. -
ANS 2.26
Abstract: This standard provides (a) criteria for selecting the seismic design category1) (SDC) for nuclear facility structures, systems, and components (SSCs) to achieve earthquake safety and (b) criteria and guidelines ... -
ANS 8.6
Abstract: This standard provides safety guidance for conducting subcritical neutron-multiplication measurements where physical protection of personnel against the consequences of a criticality accident is not provided. The ... -
ANS 6.3.1
Abstract: This standard describes a test program to be used in evaluating biological radiation shielding in nuclear reactor facilities under normal operating conditions including anticipated operational occurances. The program ... -
ANS 2.29
Abstract: This standard provides criteria and guidance for performing a probabilistic seismic hazard analysis (PSHA) for the design and construction of nuclear facilities. As defined in American National Standards Institute0American ... -
ANS 1
Abstract: This standard provides for the safe conduct of critical experiments. Such experiments study neutron behavior in a fission device where the energy produced is insufficient to require auxiliary cooling, and the power history ... -
ANS 40.37
Abstract: This standard sets forth design, fabrication, and performance recommendations and requirements for mobile low-level radioactive waste processing (MRWP) systems (including components) for nuclear facilities that generate ... -
ANS 8.17
Abstract: This standard provides nuclear criticality safety criteria for the handling, storage, and transportation of LWR fuel rods and units outside reactor cores. -
ANS 8.3
Abstract: This standard is applicable to all operations involving fissionable materials in which inadvertent criticality can occur and cause personnel to receive unacceptable exposure to radiation.
This standard is not applicable ... -
ANS 8.12
Abstract: This standard is applicable to operations with plutonium-uranium oxide fuel mixtures outside nuclear reactors, except the assembly of these materials under controlled conditions, such as in critical experiments. Basic ... -
ANS 2.3
Abstract: This standard establishes guidelines to estimate the frequency of occurrence and the magnitude of parameters associated with rare meteorological events such as tornadoes, hurricanes, and extreme straight line winds at ... -
ANS 8.14
Abstract: This standard provides guidance for the use of soluble neutron absorbers for criticality control. This standard addresses neutron absorber selection, system design and modif ications, safety evaluations, and quality control ...