Show simple item record

MICROCIRCUIT, MEMORY, DIGITAL, CMOS UV ERASABLE PROGRAMMABLE LOGIC ARRAY, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:53:26Z
date available2017-09-04T16:53:26Z
date copyright04/24/2012
date issued2012
identifier otherWVPIVEAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/116843
description abstractThis drawing form a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". when available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes M, B and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
       Device type    Generic number 1/        Circuit function        Access time             01                             Registered combinatorial        25 ns            02                             Registered combinatorial        20 ns


The device class designator shall be a single letter identifying the product assurance level as follows:
        Device class                      Device requirements documentation               M              Vendor self-certification to the requirements for non-JAN class B                             microcircuits in accordance with 1.2.1 of MIL-STD-883             B or S           Certification and qualification to MIL-M-38510             Q or V           Certification and qualification to MIL-I-38535


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
        Outline letter        Descriptive designator       Terminals          Package style                X               CDIP3-T28 or GDIP4-T28           28        Duel-in-line 2/               Y               GDFP2-F28                        28        Flat pack 2/               Z               GQCC1-J28                        28        "J" lead chip carrier 2/               3               CQCC1-N28                        28        Square leadless chip carrier 2/


The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
     Supply voltage range to ground potential (VCC). . . . .    −0.5 V dc to +7.0 V dc      Output voltage range applied. . . . . . . . . . . . . .    −0.5 V dc to +7.0 V dc      DC input voltage range. . . . . . . . . . . . . . . . .    −3.0 V dc to +7.0 V dc      Maximum power dissipation (PD). . . . . . . . . . . . .    1.0 W 4/      Lead temperature (soldering 10 seconds) . . . . . . . .    +260°C      Thermal resistance, junction-to-case (θJC). . . . . . .    See MIL-STD-1835      Maximum junction temperature (TJ) . . . . . . . . . . .    +175°C      Storage temperature range (TSTG)  . . . . . . . . . . .    −65°C to +150°C      Temperature under bias  . . . . . . . . . . . . . . . .    −55°C to +125°C      Output current into outputs (low) . . . . . . . . . . .    12 mA      Endurance . . . . . . . . . . . . . . . . . . . . . . .    25 erase/write cycles (minimum)


     Supply voltage range (VCC)  . . . . . . . . . . . . . .    +4.5 V dc minimum to +5.5 V dc maximum      Ground voltage (GND)  . . . . . . . . . . . . . . . . .    0.0 V dc      Input high voltage (VIH)  . . . . . . . . . . . . . . .    2.2 V dc minimum      Input low voltage (VIL) . . . . . . . . . . . . . . . .    0.8 V dc  maximum      Case operating temperature range (TC) . . . . . . . . .    −55°C to +125°C


   Fault coverage measurement of manufacturing      Logic tests (MIL-STD-883, test method 5012) . . . . . .    5/ percent


Intended Use: Microcircuits conforming to this drawing are intended for use for government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-91584 REV Anum
titleMICROCIRCUIT, MEMORY, DIGITAL, CMOS UV ERASABLE PROGRAMMABLE LOGIC ARRAY, MONOLITHIC SILICONen
typestandard
page21
statusActive
treeDLA - CC - DLA Land and Maritime:;2012
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record