Show simple item record

MIRCOCIRCUIT, DIGITAL, CMOS, ASYNCHRONOUS, SERIAL CONTROLLER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:55:12Z
date available2017-09-04T16:55:12Z
date copyright03/29/1995
date issued1995
identifier otherBVTYDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/118669
description abstractThis drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete PIN shall be as shown in the following example: CHART
The device type(s) shall identify the circuit function as follows:
         Device type                     Generic number                                Circuit function                01                             82510                             CHMOS single component asynchronous                                                                                serial controller 1/               02                             82510                             CHMOS single component asynchronous                                                                                serial controller 2/


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
         Outline letter          Descriptive designator          Terminals                Package style                 X                        GDIP1-T28 or                 28             dual-in-line package                                         CDIP2-T28                3                        CQCC1-N28                    28             square leadless chip carrier


The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein). Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
     Voltage on any pin with respect to GND- - - - - - - -     −0.5 V dc to VCC + 0.5      Storage temperature range - - - - - - - - - - - - - -     −65°C to +150°C      Maximum power dissipation (PD) 3/ - - - - - - - - - -     250 mW      Thermal resistance, junction-to-case (OJC)- - - - - -     See MIL-STD-1835      Junction Temperature (TJ) - - - - - - - - - - - - - -     150°C      Lead temperature (soldering, 10 seconds)- - - - - - -     265°C


     Supply voltage (VCC)- - - - - - - - - - - - - - - - -     4.5 V dc to 5.5 V dc      Case operating temperature range (TC) - - - - - - - -     −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes.
languageEnglish
titleSMD-5962-89725 REV Anum
titleMIRCOCIRCUIT, DIGITAL, CMOS, ASYNCHRONOUS, SERIAL CONTROLLER, MONOLITHIC SILICONen
typestandard
page17
statusActive
treeDLA - CC - DLA Land and Maritime:;1995
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record