Show simple item record

MICROCIRCUITS, MEMORY, DIGITAL, CMOS, 4K X 9 PARALLEL-SERIAL FIFO, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:57:38Z
date available2017-09-04T16:57:38Z
date copyright04/01/2011
date issued2011
identifier otherBWNKIEAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/121190
description abstractThis drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete PIN shall be as shown in the following example: ILLUSTRATION
The device type(s) shall identify the circuit function as follows:
      Device type   Generic number           Circuit function          Access time             01         (see 6.6)      4k × 9-bit parallel-serial FIFO      120 ns            02         (see 6.6)      4k × 9-bit parallel-serial FIFO       80 ns            03         (see 6.6)      4k × 9-bit parallel-serial FIFO       65 ns            04         (see 6.6)      4k × 9-bit parallel-serial FIFO       50 ns            05         (see 6.6)      4k × 9-bit parallel-serial FIFO       40 ns


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
      Outline letter   Descriptive designator   Terminals      Package style              Q          GDIP1-T40 or CDIP2-T40       40      Dual-in-line             X                 CQCC1-N44             44      Square leadless chip carrier


The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein). Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
  Terminal voltage with respect to ground . . . . . . . . . −0.5 V dc to +7.0 V dc   DC output current . . . . . . . . . . . . . . . . . . . . 50 mA   Storage temperature range . . . . . . . . . . . . . . . . −65°C to +150°C   Maximum power dissipation (PD)  . . . . . . . . . . . . . 1.0 W   Lead temperature (soldering, 10 seconds)  . . . . . . . . +260°C   Thermal resistance, junction-to-case (QJC)  . . . . . . . See MIL-STD-1835   Junction temperature (TJ) . . . . . . . . . . . . . . . . +150°C 1/


  Supply voltage range (VCC)  . . . . . . . . . . . . . . . 4.5 V dc to 5.5 V dc   Minimum high level input voltage (VIH)  . . . . . . . . . 2.2 V dc   Maximum low level input voltage (VIL) . . . . . . . . . . +0.8 V dc 2/   Case operating temperature range (TC) . . . . . . . . . . −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes.
languageEnglish
titleSMD-5962-89943 REV Bnum
titleMICROCIRCUITS, MEMORY, DIGITAL, CMOS, 4K X 9 PARALLEL-SERIAL FIFO, MONOLITHIC SILICONen
typestandard
page39
statusActive
treeDLA - CC - DLA Land and Maritime:;2011
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record