Show simple item record

MICROCIRCUIT, DIGITAL, CMOS, 16-BIT MICROPROCESSOR, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:59:12Z
date available2017-09-04T16:59:12Z
date copyright04/10/1990
date issued1990
identifier otherXLDVDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/122597
description abstractThis drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete part number shall be as shown in the following example: CHART
The device types shall identify the circuit function as follows:
         Device type      Generic number             Circuit function        I to Y delay (tPD1)               01         29C116, 7C9116-99       16-bit CMOS microprocessor         100 ns              02         29C116-1, 7C9116-75     16-bit CMOS microprocessor          75 ns              03         29C116-2, 7C9116-65     16-bit CMOS microprocessor          65 ns              04               7C9116-40         16-bit CMOS microprocessor          40 ns


The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows:
      Outline letter                            Case outline            U          C-6 (52-terminal, .761" × .761" × .120"), square chip carrier package           X          See figure 1 (52-lead, 2.635" × .820" × .195"), dual-in-line package           Y          See figure 1 (64-lead, .910" × .910" × .090"), flat package           Z          See figure 1 (52-terminal, .760" × .760" × .075"), square chip carrier package


  Supply voltage range - - - - - - - - - - - - - - - - - - -   −0.3 V dc to +7.0 V dc   Input voltage range- - - - - - - - - - - - - - - - - - - -   −0.3 V dc to VCC + 0.3 V dc   Storage temperature range- - - - - - - - - - - - - - - - -   −65°C to +150°C   Maximum power dissipation (PD) - - - - - - - - - - - - - -   1.5 W   Lead temperature (soldering, 10 seconds) - - - - - - - - -   +300°C   Thermal resistance, junction-to-case (θJC):     Cases X and Y- - - - - - - - - - - - - - - - - - - - - -   10°C/W     Case Z - - - - - - - - - - - - - - - - - - - - - - - - -   8.0°C/W     Case U - - - - - - - - - - - - - - - - - - - - - - - - -   See MIL-M-38510, appendix C   Junction temperature (TJ)- - - - - - - - - - - - - - - - -   +175°C


  Supply voltage range (VCC) - - - - - - - - - - - - - - - -   4.5 V dc to 5.5 V dc   Minimum input high voltage (VIH) - - - - - - - - - - - - -   2.0 V dc   Maximum input low voltage (VIL)- - - - - - - - - - - - - -   0.8 V dc   Case operating temperature range (TC)- - - - - - - - - - -   −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
languageEnglish
titleSMD-5962-88612 REV Anum
titleMICROCIRCUIT, DIGITAL, CMOS, 16-BIT MICROPROCESSOR, MONOLITHIC SILICONen
typestandard
page26
statusActive
treeDLA - CC - DLA Land and Maritime:;1990
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record