Show simple item record

MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, DUAL 4-INPUT NAND GATE, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T17:01:09Z
date available2017-09-04T17:01:09Z
date copyright06/12/1998
date issued1998
identifier otherXQPBEAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/124647
description abstractThis appendix establishes minimum requirements for microcircuit die to be supplied under the Qualified Manufacturers List (QML) Program. QML microcircuit die meeting the requirements of MIL-PRF-38535 and the manufacturers approved QM plan for use in monolithic microcircuits, multichip modules (MCMs), hybrids, electronic modules, or devices using chip and wire designs in accordance with MIL-PRF-38534 are specified herein. Two product assurance classes consisting of military high reliability (device class Q) and space application (device Class V) are reflected in the Part or Identification Number (PIN). When available a choice of Radiation Hardiness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes Q and V RHA identified die shall meet the MIL-PRF-38535 specified RHA levels. A dash (-) indicates a non-RHA die.
The device type(s) shall identify the circuit function as follows:
       Device type          Generic number           Circuit function             01                  HCS20                 Radiation hardened, SOS,                                                      high speed CMOS, dual                                                      4-input NAND gate.


       Device class          Device requirements documentation           Q or V              Certification and qualification to the die requirements of MIL-PRF-38535.


The die details designation shall be a unique letter which designates the die's physical dimensions, bonding pad location(s) and related electrical function(s), interface materials, and other assembly related information, for each product and variant supplied to this appendix.
          Die Types               Figure number               01                        A-1


          Die Types               Figure number               01                        A-1


          Die Types               Figure number               01                        A-1


          Die Types               Figure number               01                        A-1


See paragraph 1.3 within the body of this drawing for details.
See paragraph 1.4 within the body of this drawing for details.
Intended Use: Microcircuit die conforming to this drawing are intended for use in microcircuits built in accordance with MIL-PRF-38535 or MIL-PRF-38534 for government microcircuit applications (original equipment), design applications and logistics purposes.
languageEnglish
titleSMD-5962-95778 REV Anum
titleMICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, DUAL 4-INPUT NAND GATE, MONOLITHIC SILICONen
typestandard
page25
statusActive
treeDLA - CC - DLA Land and Maritime:;1998
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record