Show simple item record

MICROCIRCUIT, LINEAR, HIGH PERFORMANCE SIXTH ORDER SWITCHED CAPACITOR BUTTERWORTH LOW-PASS FILTER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T17:01:29Z
date available2017-09-04T17:01:29Z
date copyright33589
date issued1991
identifier otherXRKWDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/124953
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
    Device type    Generic number            Circuit function               fCLK/fCO          01            LMF60-100         6th-order switched capacitor            100:1                                         Butterworth low-pass filter         02            LMF60-50          6th-order switched capacitor            50:1                                         Butterworth low-pass filter


The device class designator shall be a single letter identifying the product assurance level as follows:
    Device class        Device requirements documentation           M              Vendor self-certification to the requirements for non-JAN class B                         microcircuits in accordance with 1.2.1 of MIL-STD-883        B or S            Certification and qualification to MIL-M-38510        Q or V            Certification and qualification to MIL-I-38535


For device classes M, B, and S, case outline(s) shall meet the requirements in appendix C of MIL-M-38510 and as listed below. For device classes Q and V, case outline(s) shall meet the requirements of MIL-I-38535, appendix C of MIL-M-38510, and as listed below.
     Outline letter                     Case outline              C        D-1 (14-lead, .785" × .310" × .200"), dual-in-line package


The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
Total supply voltage (V+ − V−)  2/ - - - - - - -     15 V Voltage at any pin - - - - - - - - - - - - - - -     V + + 0.2 V, V− − 0.2 V Input current at any pin  3/ - - - - - - - - - -     5 mA Package input current  3/  - - - - - - - - - - -     20 mA Power dissiaption (PD)   - - - - - - - - - - - -     500 mW Lead temperature (soldering, 10 seconds)  - - - -     +300°C Thermal resistance, junction-to-case (ΘJC) - - -     See MIL-M-38510, appendix C Junction temperature (TJ)    - - - - - - - - - -     +125°C Storage temperature range  - - - - - - - - - - -     −65°C to +150°C Thermal resistance, junction-to-ambient (ΘJA)- -     62°C/W


Total supply voltage range (V+ − V−) 2/  - - -     4 V to 14 V Ambient operating temperature range (TA) - - -     −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-90967num
titleMICROCIRCUIT, LINEAR, HIGH PERFORMANCE SIXTH ORDER SWITCHED CAPACITOR BUTTERWORTH LOW-PASS FILTER, MONOLITHIC SILICONen
typestandard
page18
statusActive
treeDLA - CC - DLA Land and Maritime:;1991
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record