IEEE 1727

Guide for Working Procedures on Underground Transmission Circuits with Induced Voltage

contributor author	IEEE - The Institute of Electrical and Electronics Engineers, Inc.
date accessioned	2017-09-04T17:05:09Z
date available	2017-09-04T17:05:09Z
date copyright	03/06/2013
date issued	2013
identifier other	YBOBDFAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/128652
description abstract	This guide establishes induced voltage working procedures for underground transmission circuits. A transmission circuit when de-energized will have an induced voltage when in a common duct bank with an energized circuit. The induced voltage may be a possible safety hazard. The induced voltage may be determined by modeling the circuits and by measurement. This guide addresses the working procedures to follow when performing work where induced voltage is present. Purpose The purpose of this guide is to establish working procedures for de-energized underground transmission circuits where induced voltage is present. The guide will describe working procedures to use under this condition.
language	English
title	IEEE 1727	num
title	Guide for Working Procedures on Underground Transmission Circuits with Induced Voltage	en
type	standard
page	57
status	Active
tree	IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
contenttype	fulltext