درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 1661-1680 of 22183
-
DIN EN ISO 12813
Abstract: Scope: This International Standard defines requirements for short-range communication for the purposes of compliance checking in autonomous electronic fee-collecting systems. Compliance checking communication (CCC) takes ... -
VG 96917-1
Abstract: Scope: Diese Norm gilt in Verbindung mit VG 95319-2, VG 96917-2 und VG 96917-3 für Steckverbinder ohne Schutzkontakt bis max. 24 V Bemessungsspannung. Bei Anwendung dieser Steckverbinder sind die Bestimmungen nach DIN ... -
DIN EN ISO 17776
Abstract: Scope: This document describes processes for managing major accident (MA) hazards during the design of offshore oil and gas production installations. It provides requirements and guidance on the development of strategies ... -
DIN CEN ISO/TS 16530-2
Abstract: Scope: This Technical Specification provides requirements and methods to the oil and gas industry to manage well integrity during the well operational phase. The operational phase is considered to extend from handover of ... -
DIN EN 13481-5
Abstract: Scope: This European Standard is applicable to fastening systems in Categories A–D as specified in EN 13481-1:2012, 3.1, for attaching rails to the uppermost surface of concrete or asphalt slabs and for embedded rails ... -
DIN ISO 16063-43
Abstract: Scope: This document prescribes terms and methods on the estimation of parameters used in mathematical models describing the input/output characteristics of vibration transducers, together with the respective parameter ... -
-
DIN EN 3672
Abstract: Scope: This European Standard specifies the characteristics of self-locking shank nuts in NI-P101HT, silver plated, for use in 30° cone holes, for aerospace applications. Classification: 1 210 MPa 1)/730 °C 2). -
DIN EN 16739
Abstract: Scope: This European standard specifies the methodology for the assessment of test results from the emissions of a combustible air freshener, when tested according to EN 16738 and follows REACH Guidance and consumer habits ... -
DIN EN ISO/IEC 27038
Abstract: Scope: This International Standard specifies characteristics of techniques for performing digital redaction on digital documents. This International Standard also specifies requirements for software redaction tools and ... -
DIN EN ISO 19110
Abstract: Scope: This document defines the methodology for cataloguing feature types. This document specifies how feature types can be organized into a feature catalogue and presented to the users of a set of geographic data. This ... -
DIN EN ISO 24534-3
Abstract: Scope: This part of ISO 24534 provides the requirements for an electronic registration identification (ERI) that is based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to ... -
DIN EN ISO 5577
Abstract: Scope: This document defines the terms used in ultrasonic non-destructive testing and forms a common basis for standards and general use. This document does not cover terms used in ultrasonic testing with phased arrays. ... -
DIN ISO 18600
Abstract: Scope: This International Standard defines terms of the card with a web-forming method using staple fibres for non-woven machinery. -
-
DIN EN ISO 11381
Abstract: Scope: This International Standard specifies requirements for ISO metric screw threads for use with spectacle frames. Provision is made for screw threads of the following nominal sizes: S0,8 × 0,2; M1,0 × 0,25; ... -
DIN 18306
Abstract: Scope: This standard deals with the laying of drains and sewers underground, including those passing under buildings, and the installation of associated manholes. It also applies to embedment backfilling work. This standard ... -
DIN EN ISO 15025
Abstract: Scope: This document specifies two procedures (surface ignition and bottom-edge ignition) for determining flame spread properties of vertically oriented flexible materials in the form of single or multicomponent fabrics ... -
DIN EN ISO 283
Abstract: Scope: This International Standard specifies a test method for the determination of the full thickness tensile strength in the longitudinal direction and the elongation at the reference force and breaking point of conveyor ... -