درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 1981-2000 of 22183
-
DIN EN ISO 23145-1
Abstract: Scope: This part of ISO 23145 specifies a procedure to determine the tap density of granulated or ungranulated ceramic powders by a constant-volume measuring method. -
DIN EN 378-4
Abstract: Scope: This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair ... -
DIN EN 13757-6
Abstract: Scope: This European Standard specifies the physical layer parameters of a local meter readout system (“Local Bus”) for the communication with and the readout of a single meter or a small cluster of meters via ... -
DIN EN ISO 28721-2
Abstract: Scope: This part of ISO 28721 specifies requirements for the resistance to chemical attack and thermal shock of chemical enamels and their designation for ordering purposes. It is applicable to enamelled apparatus, piping ... -
LN 9368-6
Abstract: Scope: Die in dieser Norm aufgeführten Kenn-Nummern sind als Bezeichnung für Oberflächenbehandlungen für den Bereich Luft- und Raumfahrt anzuwenden. Zweck dieser Kenn-Nummern ist der Ersatz von zum Teil ... -
-
DIN EN 16475-3
Abstract: Scope: This European Standard specifies the requirements and test methods for draught regulators, standstill opening devices and combined secondary air devices that are used as components, carrying flue gases, in order to ... -
-
DVS 2207-5 BEIBLATT 2
Abstract: Scope: This supplement to Technical Code DVS 2207-5 applies to the testing and assessment of PE-HD welded joints on factory made, thermal insulated and directly buried pipes for district heating networks laid directly ... -
-
DIN EN ISO 14046
Abstract: Scope: This International Standard specifies principles, requirements and guidelines related to water footprint assessment of products, processes and organizations based on life cycle assessment (LCA). This International ... -
DIN EN ISO 18123
Abstract: Scope: This International Standard aims to define the requirements and method used to determine the volatile matter content of solid biofuels. It is intended for persons and organisations that manufacture, plan, sell, erect ... -
DIN EN 4830-003
Abstract: Scope: Diese Europäische Norm legt die Eigenschaften von Modulen für optische Anschlüsse nach EN 4639-10X in der Familie der modularen Rechtecksteckverbinder nach EN 4165 fest. -
DIN EN 4644-022
Abstract: Scope: This European Standard specifies the size 2 plug for disconnect applications used in the family of modular rectangular electrical and optical connector with rectangular inserts. The receptacle corresponding to this ... -
DIN EN 438-6
Abstract: Scope: This European Standard applies to Exterior-grade Compact laminates of thickness 2 mm and greater produced by using a high pressure process. It specifies requirements for standard and flame-retardant laminates intended ... -
DIN EN ISO 17523
Abstract: Scope: This International Standard specifies the requirements that apply to electronic prescriptions. It describes generic principles that are considered important for all electronic prescriptions. The scope of this ... -
DIN EN 755-7
Abstract: Scope: This European Standard specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded seamless tubes with an outside diameter (OD) from 8 mm to 450 mm (round tube, see Figure 1) or with ... -
DIN ISO 9022-23
Abstract: Scope: This part of ISO 9022 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under ... -
DIN EN ISO 80601-2-72
Abstract: Scope: IEC 60601‐1:2005+AMD1:2012, 1.1 is replaced by: This part of ISO 80601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of a VENTILATOR in combination with its ACCESSORIES, hereafter referred to as ME ... -
DIN EN 61800-7-203
Abstract: Scope: This part of IEC 61800 specifies profile type 3 for power drive systems (PDS). Profile type 3 can be mapped onto different communication network technologies. The functions specified in this part of IEC 61800 are ...