درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 2021-2040 of 22183
-
DIN EN 14535-3
Abstract: Scope: This European Standard applies to brake discs designed to be fitted to railway vehicles. This European Standard comprises a type test of brake disc performance. The brake disc is tested for energy conversion and ... -
-
DIN EN ISO 9934-1
Abstract: Scope: This document specifies general principles for the magnetic particle testing of ferromagnetic materials. Magnetic particle testing is primarily applicable to the detection of surface-breaking discontinuities, ... -
DIN EN 13523-22
Abstract: Scope: This part of the EN 13523 series specifies the procedure for determining the difference in the colour of an organic coating on a metallic substrate by visual comparison against a standard using either diffuse natural ... -
DIN EN ISO 10309
Abstract: Scope: This International Standard specifies a method of revealing pores or other discontinuities, when testing metallic coatings, that are not visibly affected by ferricyanide and chloride ions during the test period and ... -
DIN EN 62056-6-1
Abstract: Scope: This part of IEC 62056 specifies the overall structure of the OBject Identification System (OBIS) and the mapping of all commonly used data items in metering equipment to their identification codes. OBIS provides a ... -
DIN EN 4652-412
Abstract: Scope: This European Standard specifies the characteristics of bayonet coupling (C interface) coaxial straight square flange receptacles − 50 ohms. The cable to connector assembly is a clamp technology. -
DIN EN 12449
Abstract: Scope: This European Standard specifies the composition, property requirements and tolerances on dimensions and form for seamless round drawn copper and copper alloy tubes for general purposes supplied in the size range ... -
DIN EN 16725
Abstract: Scope: This European Standard specifies restoration of cast austenitic manganese steel for fixed crossings and cradles for crossings with movable parts, designed to be flash butt welded or bolted to adjoining rails ... -
DIN EN ISO 15512
Abstract: Scope: This International Standard specifies methods for the determination of the water content of plastics in the form of powder, granules, and finished articles. These methods do not test for water absorption (kinetics ... -
DIN 18322
Abstract: Scope: This standard deals with the laying of cables and conduits and the construction and repair of ducting, and includes the installation of associated manholes, jointing chambers, poles, columns, distributing cabinets, ... -
DIN EN ISO 17635
Abstract: Scope: This document gives guidelines for the choice of non-destructive testing (NDT) methods for welds and evaluation of the results for quality control purposes, based on quality requirements, material, weld thickness, ... -
DIN EN 448
Abstract: Scope: This European Standard specifies requirements and test methods for fittings of prefabricated thermally insulated pipe-in-pipe assemblies comprising a steel service fitting from DN 20 to DN 1200, rigid polyurethane ... -
DIN EN 597-2
Abstract: Scope: This European Standard specifies a test method to assess the ignitability of mattresses, upholstered bed bases, when subjected to a gas flame as an ignition source. Air mattresses and water beds are excluded from ... -
DIN EN 6049-009
Abstract: Scope: This European Standard specifies the characteristics of post installation flexible self-wrapping fire protection sleeves for electrical cable and cable bundles, providing 360° fire protection to electrical ... -
-
DIN EN 16908
Abstract: Scope: The general scope of the core product category rules (PCR) is given in EN 15804:2012+A1:2013, Clause 1. This PCR is primarily intended for the creation of cradle-to-gate EPDs of cement and building lime. In other ... -
DIN EN 711
Abstract: Scope: This European Standard is applicable to railings for decks and in gangways on inland navigation vessels. It lays down design, dimensions, strength and test conditions which have to be observed for safety reasons. ... -
DIN ISO 22514-1
Abstract: Scope: Dieser Teil von ISO 22514 beschreibt die wesentlichen Grundsätze hinsichtlich Fähigkeit und Leistung von Fertigungsprozessen. Das Dokument ist vorgesehen, eine Anleitung für Situationen bereit zu ... -
DIN 81850
Abstract: Scope: This standard applies to end links for stud link anchor chain cables, grade K4 which are components of three link adapter pieces as specified in DIN 81854.