Show simple item record

MICROCIRCUIT, DIGITAL, CMOS, 1-TO-64 BIT SHIFT REGISTER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T17:06:44Z
date available2017-09-04T17:06:44Z
date copyright33926
date issued1992
identifier otherBYXWDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/130246
description abstractThis drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete PIN shall be as shown in the following example: CHART
The device type(s) shall identify the circuit function as follows:
     Device type      Generic number                Circuit function            01               4557B                1-to-64 bit shift register


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
     Outline letter         Descriptive designator           Terminals            Package style             E                 GDIP1-T16 or CDIP2-T16             16                Dual-in-line            F                 GDFP2-F16 or CDFP3-F16             16                Flat package


The lead finish shall be as specified in MIL-M-38510. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
     Supply voltage range (VDD)  - - - - - - - - - - - - - - -     −0.5 V dc to +18 V dc        (voltages referenced to VSS terminal)      Input voltage range - - - - - - - - - - - - - - - - - - -     −0.5 V dc to VDD + 0.5 V dc      Storage temperature range - - - - - - - - - - - - - - - -     −65°C to +150°C      Maximum power dissipation (PD)  - - - - - - - - - - - - -     400 mW  1/      Lead temperature (soldering, 10 seconds)  - - - - - - - -     +260°C      Thermal resistance, junction-to-case (ΘJC)  - - - - - - -     See MIL-STD-1835      Junction temperature (TJ) - - - - - - - - - - - - - - - -     +175°C


     Supply voltage range (VDD)  - - - - - - - - - - - - - - -     +3.0 V dc minimum to +15 V dc maximum      Minimum high level input voltage (VIH)  - - - - - - - - -     +3.5 V dc at VDD = 5 V dc      Maximum low level input voltage (VIL) - - - - - - - - - -     +1.5 V dc at VDD = 5 V dc      Case operating temperature range (TC) - - - - - - - - - -     −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for original equipment manufacturer application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
languageEnglish
titleSMD-5962-79016 REV Bnum
titleMICROCIRCUIT, DIGITAL, CMOS, 1-TO-64 BIT SHIFT REGISTER, MONOLITHIC SILICONen
typestandard
page12
statusActive
treeDLA - CC - DLA Land and Maritime:;1992
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record